In the bean sprout processing workshop, the processing of green bean sprouts goes through the process of peelingBean Sprout Vibration Screening MachineIt is a commonly used peeling equipment with high production efficiency and good peeling effect.

Small Green Bean Sprout Screening Machine for Green Bean Sprout Peeling

The bean sprout peeling machine is made of 304 stainless steel, which is environmentally friendly, pollution-free, highly corrosion-resistant, and durable.

Small Green Bean Sprout Screening Machine for Green Bean Sprout Peeling

The above picture shows a small bean sprout screening machine with a screening surface width of 500mm. We can also make a screening machine with a width of 1 meter, which is more efficient and faster.

Small Green Bean Sprout Screening Machine for Green Bean Sprout Peeling, with dimensions of 500 * -1500mm and a power of 0.25KW/2 units,

The bean sprout outlet is located directly in front, and the bean sprout skin is discharged from the lower outlet

Small Green Bean Sprout Screening Machine for Green Bean Sprout Peeling

followBean Sprout Screening MachineThe screening effect shows that the peeling effect is very ideal, and there are almost no bean sprouts in the screened bean sprouts. There are also very few bean sprouts inside the bean sprouts

The bean sprout screening machine mainly consists of a screening box, a screening frame, and a sieve meshVIBRATION MOTORComposed of motor pedestal, damping spring, bracket, etc.

1. Screening box: It is welded from several steel plates of different thicknesses, with certain strength and rigidity, and is the main component of the screening machine.

2. Screen frame: made of pine wood or wood with small deformation, mainly used to keep the screen flat and achieve normal screening.

3. Screen mesh: There are several types of screens including low-carbon steel, brass, bronze, stainless steel wire, etc.

4. Vibration motor (refer to the vibration motor user manual for usage and maintenance methods).

5. Motor pedestal: When installing the vibration motor, the connecting screws must be tightened before use, especially three days before the new screening machine is put into use, and must be repeatedly tightened to avoid loosening and causing accidents.

6. Vibration damping spring: prevents vibration from being transmitted to the ground while supporting the entire weight of the screen box. During installation, the spring must be perpendicular to the ground.

7. Bracket: Composed of four pillars and two channel steels, it supports the sieve box. During installation, the pillars must be perpendicular to the ground, and the channel steels under the two pillars should be parallel to each other.

The previous artificial water soaking for peeling had low efficiency, slow speed, and low cleanliness. Now it has gradually been replaced by bean sprout screening machines, and mechanized operation is imperative.