
Model: BJSFZN-107 series
Size: 160mmx108mmx40mm
Net weight: 200g
brief introduction
BJSFZN-107 is a high-performance UHF band ISO18000-6C (EPC C1G2) and ISO18000-6B multi protocol electronic tag reader/writer. It is designed with completely independent intellectual property rights and combined with proprietary efficient electronic tag collision processing algorithms to achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It can be widely used in various wireless radio frequency identification (RFID) systems such as logistics, personal identification, intelligent parking lots, access control systems, anti-counterfeiting systems, and production process control.
Standard product: BJSFOne ZN-107 host (Weigen, R232, RS485), one DB9 serial port cable, and one dedicated power supply
Optional:RJ45 interface
characteristic
Fully independent intellectual property design;
Fully support UHF EPC Gen2 (ISO18000-6C) and ISO18000-6B protocol electronic tags;
Advanced tag collision processing algorithm with high recognition rate;
Operating frequency FCC 902-928MHz or CE 865-868MHz (can be adjusted according to different countries or regions' requirements)
Operate in broad-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
Output power: maximum 30dBm (adjustable);
Built in transceiver antenna, reading distance>600mm, writing distance>30mm*
Low power design, powered by a single 6V power supply;
Support response (interactive) working mode and active working mode;
The output format and parameters can be configured in the active working mode;
Supports RS232, Wiegand interface, RJ45 network port (optional);
Provide dynamic link libraries (DLLs) that support secondary development.
The effective distance is related to the protocol format, electronic tags, and working environment.
interface
|
DB9 pin description |
||
|
Pin number |
symbol |
describe |
|
1 |
NC |
reserve |
|
2 |
TXD |
RS232 data output |
|
3 |
RXD |
RS232 data input |
|
4 |
NC |
reserve |
|
5 |
GND |
grounds |
|
6 |
NC |
reserve |
|
7 |
WD0 |
Weigen Data 0 |
|
8 |
WD1 |
Weigen Data 1 |
|
9 |
GND |
grounds |
electrical characteristics
Limit parameters
|
project |
symbol |
numerical value |
unit |
|
supply voltage |
VCC |
12 |
V |
|
operation temperature |
TOPR |
-10~+60 |
℃ |
|
storage temperature |
TSTR |
-25~+80 |
℃ |
L specifications
Unless otherwise specified, the specifications shown are taken from TAUnder working conditions of 25 ℃ and VCC=+6V
|
project |
symbol |
minimum |
typical |
maximum |
unit |
|
supply voltage |
VCC |
5.5 |
6 |
12 |
V |
|
Working current |
IC |
150 |
200 |
mA |
|
|
Operating Frequency |
FREQ |
902 |
928 |
MHz |
|
|
Effective distance* |
DIS |
0 |
300 |
450 |
mm |
*The effective distance is related to the protocol format, electronic tags, and working environment.
