1. The instrument consists of a support and one or two thermal corrosion tanks, with a working pressure of 40 psi and a working temperature of up to 160 ° C. The electronic timer controls the testing time, and the electronic temperature controller controls the temperature;

2. The instrument casing is made of ceramic coated refined steel surface, which is durable and long-lasting;
3. There is a protective cover outside the corrosion pool;
4. The thermal corrosion pool is made of heat-resistant glass, and both the cover and bottom are made of stainless steel material;

5. The stainless steel heat-conducting rod is controlled by a solid-state relay for a 950 W heater;
6. The components installed at the top of the corrosion pool, including the vent valve, pressure reducing valve, and pressure gauge, are all made of stainless steel material;
7. The injection port is located on the upper cover with a sealed nozzle, and four stainless steel columns are connected to the upper cover and base;
8. The temperature controller of the instrument is an intelligent regulator that integrates temperature control and display, and is equipped with a microprocessor for PID adjustment. The sensor is a K-type thermal sensor

9. Electric couple, for dual position instruments, all components are two sets;
10. Working range: from room temperature to 160 ° C;
11. The instrument has over temperature safety protection function;
12. Electronic timer, which can preset the testing time. After reaching the time, the instrument will automatically stop heating. The two corrosion pools can be tested separately without interfering with each other;