Adhesive tensile bonding strength testing machine according to the standard:

This testing machine is manufactured according to the GB/T 16491-2008 standard for electronic universal testing machines.

This testing machine is calibrated and accepted according to GB/T12160-2002 "Provisions for extensometers for uniaxial testing" and GB/T16825-1997 "Inspection of tensile testing machines".

Introduction to the function of the adhesive tensile bonding strength testing machine: automatic shutdown: after the sample breaks, the moving crossbeam automatically stops; Manual gear shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data; Conditional storage: Test control data and sample conditions can be modularized, facilitating batch testing;

Automatic transmission: The speed of moving the crossbeam during the test can be automatically adjusted according to a pre-set program or manually adjusted;

Automatic calibration: The system can automatically calibrate the accuracy of the displayed values;

Automatic saving: After the experiment is completed, the experimental data and curves are automatically saved;

Process implementation: The experimental process, measurement, display, and analysis are all completed by a microcomputer;

Batch experiment: For samples with the same parameters, they can be sequentially completed after one setting;

Main technical parameters of adhesive tensile bonding strength testing machine

Style: Single arm (three guide columns, one pair of ball screws)

Test force: 5000N, divided into four levels: * 1, * 2, * 5, * 10

Range: 2% -100%; (General configuration); 0.5% -100% (high-end)

Accuracy of experimental force; ± 1% (standard configuration); ± 0.5% (high-end)

Accurate value of experimental force; 0.1N

Testing machine level: Level 1 (standard configuration); 0.5 level (high-end)

Displacement resolution: 0.01mm;

Displacement measurement accuracy: ± 0.5%;

Stretching stroke: 600mm (can be customized according to customer needs)

Compression stroke: 600mm (can be customized according to customer needs)

Displacement speed control range: 0.01mm/min to 300mm/min (standard configuration); 0.01mm/min~500mm/min (high-end)

Displacement velocity control accuracy: ± 0.5%;

Testing machine size: approximately 530mm x 260mm x 1550mm

Weight of testing machine: approximately 120KG

Appearance: Should comply with the requirements of GB/T2611

Complete set: meets standard requirements

Protection function: The testing machine has overload protection function

Power supply: 220V, 50Hz