Micro elliptical gear flowmeter (also known as displacement flowmeter, gear flowmeter) is a type of volumetric flowmeter with high accuracy in flow meters.

How to install a flow meter

1.Before installing the flowmeter, the pipeline should be thoroughly cleaned and a filter should be installed in front of the flowmeter to prevent debris from entering. During the installation process, please be sure to avoid the entry of dirt and impurities into the flow inlet end. When the tested liquid contains gas, an air separator should be installed.

2.It should be noted that the elliptical gear shaft of the flowmeter must be installed in a horizontal position, that is, the cover must be perpendicular to the horizontal plane. For the measurement of ultra small flow, the preferred installation is bottom in and top out. The valves for regulating flow and starting and closing should be installed separately at the inlet and outlet ends of the flowmeter. nature Resistant to strong acids, strong alkalis, diesel, adhesives, lubricants, water, ethanol, vegetable oils, honey, toners, pharmaceuticals, and other chemical liquids.

3.The arrow on the flowmeter housing should point in the same direction as the liquid flow in the installed pipeline.

4.The pipeline for continuous flow and the horizontal pipeline for installing flow meters should be equipped with bypass valves for regular cleaning and maintenance. Flow meters on vertical pipelines should be installed in bypass pipelines to prevent debris from falling into the instrument.

Minghong flowmeter can replace foreign brands, including:vseFlowmeter,krachtFlowmeter,koboldFlowmeter,sikaFlowmeter,kemFlowmeter,kemFlowmeter,awFlowmeter,ovalFlow meter, Obal flow meter,aichiFlowmeter,trimecFlowmeter,flowmecFlowmeter,macnaughtFlowmeter,maxFlowmeter,gpiFlow meters, Clark flow meters, Kebao flow meters,titanFlowmeter,gricoFlowmeter,piusiFlowmeter,gpiflowmeter

Glue dispensing machine flow meters are widely used for low flow precise measurement in various industries, such as automotive, aviation, mining, power, paint, and petroleum. Applications include fuels, fuel oil lubricants, alcohol, bio, ethanol fuels, oils, adhesives, inks, insecticides, and non-conductive liquids pumped or gravity fed. Quantitative addition, robot glue, hydraulic, large motor, fuel injector, oil pump test bench and other testing applications of various small flow meters.

Why produce dispensing machine flow meters

At present, there are very few manufacturers producing small flow meters in China. In order to fill the gap in the domestic market, we have developed this small elliptical gear flow meter.

advantage:

In the field of ultra small flow measurement, compared with other types of volumetric flowmeters, the micro elliptical gear flowmeter has the following advantages:

Capable of measuring even smaller amounts of flow

Lower price

Less prone to wear and tear

Lower liquid filtration requirements

Can be easily disassembled, cleaned, and assembled on site

Technical parameters:

Material: The material of all liquid receiving parts is316Lstainless steel(alumina)And fluororubber

Explosion proof: intrinsic safety explosion-proof

Range:LCZ-4：1-250ml/minute;LCZ-10 5-1250ml/MIN

Accuracy:0.5%

Repeatability:0.1%

Output signal:0-5Square wave signal pulse4-20MA

Great work pressure:21Mpa (Customized pressure can reach147Mpa)

Large pressure difference:LCZ-4:34Kpa；

Medium viscosity: It is recommended not to exceed25CP.

Pulse equivalent:MTD4: About50pulse/milliliter;

Temperature range:-40℃ to80℃

Power supply:12V

Interface:1/4Inch threaded connection(M14*1.5)

Electrical connection:M12*1.5