AEL-5000Series of exchanges/Built in DC electronic load16positionA/DreachDSPThe precise measurement circuit provides accurate measurement values, and the measurement items have a common root mean square value of voltage(rms)、Root mean square value of current(Arms)、Watt value(Watt)、volt-ampere(VA)、crest factor(CF)、Power factor(PF)、Harmonic distortion rate(THD)Voltage total harmonic distortion rate(VTHD)、Total harmonic distortion rate of current(ITHD)、peak current(lpeak)、Maximum current value(Amax)、Minimum current value(Amin)、Maximum voltage(max)Minimum voltage value(min).In addition to these measurement functions, time measurement is also provided for products such asUPSThe tripping or melting time of fuses and circuit breakers, etcOf-lineUPSThe conversion time(Transfertime).AEL-5000seriesAC/DCThe AC rectification mode of electronic loads fully complies withIECanswerUPSreachPVInverterThe testing specification requirements are as follows:IEC62040-3UPSEficiencyMeasurementnon- LinearandIEC61683ResistivePlusNon-Linear.AEL 5000The series of AC rectifier load modes useCC+CRLoad mode and maintain currentTHDexist80%To simulate realityPVInverterThe connected electronic devices.AEL-5000seriesAC/DCElectronic loads have built-in testing modes for various products, including the AC partUPS,Inverter,Fuse/Breaker,ACPowerSource,And the DC partBattery,Fuse/Breaker,DCPowerSourceWait.AEL-50001Series load addition.TYPE1~TYPE3There are two types of battery discharge tests, and the appropriate battery testing mode can be selected according to the needs. The test results can be directly displayed in theLCDThe battery is displayed on the monitorAHCapacity, voltage value after discharge, cumulative time of discharge, and other data.AEL-5000The series load provides multiple parallel and three-phase application functions, allowing users to perform testing applications with higher power or three-phase AC power, which can be used more flexibly and flexiblyAEL-5000Series communication electronic load,To save costs. In parallelThree phase operationupper,Users operate as if they were operating a standalone machine,As long as it's rightMasterJust perform the operation,Slave11reach2Slave2