The operation of stainless steel stretching hydraulic press is selected through the operation panel, which realizes two stretching forming processes of fixed stroke and fixed pressure, and can also realize three processes of pad, no pad, and ejector. Suitable for stretching and forming stainless steel products such as range hood covers, car coverings, sinks, etc.

The stainless steel stretching hydraulic press adopts a three beam and four column structure, and the hydraulic series adopts a two-way plug-in valve; The electrical control system can be equipped with a "PC" programmable controller and has independent electrical and hydraulic power mechanisms. Adopting button centralized control, it can achieve adjustment, manual and semi-automatic operation modes. This model is suitable for processes such as stretching, bending, flanging, calibration, pressing, and cold and hot extrusion.

When there is an abnormality in the stainless steel stretching hydraulic press, press the "emergency stop" button to stop the motor. Stop running with other actions. The motor control part is equipped with thermal protectors, circuit breakers, and other devices to protect the motor from overload damage and overcurrent short circuit protection. The lower chamber control block of the main cylinder is equipped with anti slip falling device and safety valve, and the slider can be stationary at any position to prevent the slider from losing control and sliding down. Overload protection: The hydraulic system circuit is equipped with a safety valve. When the oil pressure exceeds the set value, the hydraulic system will automatically overflow and limit the pressure. The protection set value can be adjusted to ensure that the press will not work overload. The electric contact pressure gauge constantly displays the pressure in the upper chamber of the master cylinder, and stops working when the set pressure is reached, effectively providing overpressure protection.

Contact phone number: