German ME six axis force sensor

Model: 6DT80
Range:100N / 10Nm //300N / 30Nm

Fx：100NFy：100N Fz：200N Mx：10Nm My：10Nm Mz. ：10Nm

Fx：300NFy：300N Fz：600N Mx：30Nm My：30Nm Mz. ：30Nm

Size: D diameter 80mm * H height 40mm

Used for measuring Fx, Fy, Fz, Mx, My, Mz in six degrees of freedom
The three mutually perpendicular axial forces and torques are mainly used for robot joint position, and the sensor FC-6DT80 is equipped with an industrial robot fastening flange that complies with DIN EN ISO 9409-1 standard

The flange is connected by M6 threaded holes, and the 6DT80 force/torque sensor can be installed on the robot flange without additional installation accessories. Compared with the standard six axis force sensor, it has better installation adaptability and fit

The sensor uses an external measurement amplifier GSV-8DS SubD44HD or GSV-8AS for force and torque load signal conditioning;
The 100N/10Nm sensor is made of aluminum alloy, while the 300N/30Nm sensor is made of high-strength stainless steel 1.4542;
weforpartnerIPRrobotprovidedApplication of force/torque sensorsSolution



Keywords of this article:
Multidimensional force sensor, multi-component force sensor, multi-component sensor, six component sensor,
Six component force testing platform, six component force balance, six dimensional force testing platform, imported six dimensional force sensor, imported six component force sensor