VIP member
16DI acquisition module
ADM-4180D is a 16 channel isolated digital/switch acquisition module that can be widely used for signal acquisition and monitoring of industrial field
Product details
Product Introduction
ADM-4180D is a 16 channel isolated digital/switch acquisition module that can be widely used for signal acquisition and monitoring of industrial field equipment. Digital input with 16 channels isolated from each otherIn addition, the 1-8 channel digital input has a counting function. DI0~DI7 each channel has a 16 bit counter that can measure switch pulses within 200Hz. The communication interface adopts RS-485 interface and supports standard MODBUS-RTU protocol, which can be directly connected to configuration software, PLC, DCS industrial control touch screen.
1. Input channel: 16 switch contact signals (dry contacts) or level signals (wet nodes)
2. Input polarity: Co negative or co positive input (polarity automatically adapts)
3. Input range: High level (digital 1): 7.5V-30V, Low level (digital 0): 0V -1V
4. Sampling rate: 1000Hz
5. Isolation voltage: 1500V
6. Input count: 16 bits (0~65535), input frequency less than 200HZ
(3) Communication interface
1. Communication protocol: MODBUS-RTU
2. Interface type: Optoelectronic isolation RS-485 interface
3. Interface protection: 15KV ESD protection, 1500V isolation protection
4. Baud rates: 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
5. Check bits: no check, even check, odd check
6. Default parameters: 9600, N， 8, 1 (baud rate and parity can be modified)
(4) System parameters
1. Module size: 104mm x 72mm x 26mm
2. Installation method: 35mm DIN rail installation
3. Working environment: Temperature: -10~65 ℃ Humidity: 0-95%, non condensing
4. Working power supply: DC9~30V less than 3W
Definition of module indicator lights
1. POWER: Power status indicator, constantly on/normal power supply
2. COMM: RS-485 interface communication indication, flashing/module is sending and receiving data
3. DI0~DI15: Digital input indicator, lit/switch input is 1
Use default communication parameters
When the communication parameters of the module (module address, baud rate, parity) are forgotten, short-circuit the Initiat and DOGND pins and power on the module again. At this time, the communication parameters of the module are (9600, N, 8, 1) and the module address is 01.
When the Initiat and DOGND pins are disconnected, the module communicates using the communication parameters set by the user. The module parameters at the factory are (9600, N, 8, 1) and the module address is 01.
ADM-4180D is a 16 channel isolated digital/switch acquisition module that can be widely used for signal acquisition and monitoring of industrial field equipment. Digital input with 16 channels isolated from each otherIn addition, the 1-8 channel digital input has a counting function. DI0~DI7 each channel has a 16 bit counter that can measure switch pulses within 200Hz. The communication interface adopts RS-485 interface and supports standard MODBUS-RTU protocol, which can be directly connected to configuration software, PLC, DCS industrial control touch screen.
Product Specifications
(1) Digital input1. Input channel: 16 switch contact signals (dry contacts) or level signals (wet nodes)
2. Input polarity: Co negative or co positive input (polarity automatically adapts)
3. Input range: High level (digital 1): 7.5V-30V, Low level (digital 0): 0V -1V
4. Sampling rate: 1000Hz
5. Isolation voltage: 1500V
6. Input count: 16 bits (0~65535), input frequency less than 200HZ
(3) Communication interface
1. Communication protocol: MODBUS-RTU
2. Interface type: Optoelectronic isolation RS-485 interface
3. Interface protection: 15KV ESD protection, 1500V isolation protection
4. Baud rates: 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
5. Check bits: no check, even check, odd check
6. Default parameters: 9600, N， 8, 1 (baud rate and parity can be modified)
(4) System parameters
1. Module size: 104mm x 72mm x 26mm
2. Installation method: 35mm DIN rail installation
3. Working environment: Temperature: -10~65 ℃ Humidity: 0-95%, non condensing
4. Working power supply: DC9~30V less than 3W
Definition of module indicator lights
1. POWER: Power status indicator, constantly on/normal power supply
2. COMM: RS-485 interface communication indication, flashing/module is sending and receiving data
3. DI0~DI15: Digital input indicator, lit/switch input is 1
Use default communication parameters
When the communication parameters of the module (module address, baud rate, parity) are forgotten, short-circuit the Initiat and DOGND pins and power on the module again. At this time, the communication parameters of the module are (9600, N, 8, 1) and the module address is 01.
When the Initiat and DOGND pins are disconnected, the module communicates using the communication parameters set by the user. The module parameters at the factory are (9600, N, 8, 1) and the module address is 01.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-