10HSUsing the same oscillation frequency as EC5 (70MHz), and with a wider range of applications, it does not require specific calibration when used in other systems. The voltage regulator on the 10HS circuit board ensures a wider excitation voltage for the sensor (3-15VDC) without the need to modify the calibration coefficient. The sensing area of the sensor is larger (1320 cm)³）The measurement results are more representative.10HS is recommended for measuring the volumetric moisture content of mineral soils.

Theoretical measurement range of 10HS sensor

technical indicators

Measurement time:10 ms
Sensor type:Capacitor (frequency domain)
output:300 - 1250 mV， Not affected by excitation voltage
Operating Temperature-40~50 ℃ (sensors available for higher or lower environments, please contact us if needed)
Power Supply: Minimum:3 VDCTypical:NA，maximum:15 VDC
Cable length:Standard configuration is 5 meters; other lengths can be customized, up to a maximum of 40 meters
Interface type:3.5mm stereo interface or 3-head tinned bare wire
Size:16.0 cm x 3.3 cm x 0.8 cm
Probe length:10cm
Support data collection (purchased separately):METER data acquisition (ZL6, EM50/60 series); Other data acquisition devices capable of collecting 3-15 VDC excitation and single ended voltage measurement signals with a resolution of no less than 12 bits.
Following standards:Produced under ISO 9001:2015 standard; EM ISO/IEC 17050:2010 (CE marking); 2014/30/EU；2011/65/EU； EN61326-1:2013； EN50581:2012

Origin and Manufacturer:the United StatesMETERCompany_{(Former Decagon)}