0.5L desktop small mixer (water-cooled) ZG-0.05L laboratory micro water-cooled mixer
1. Mixing chamber volume: 0.05L-0.1L
2. Main motor: AC motor with a power of 0.75 kW
3. Gearbox: The base and frame are made of low-carbon steel structure and contain a forced lubrication circulation system;
4. Rotor: Two sided, synchronous rotor structure (can also be designed and manufactured according to the rotor structure diagram provided by the user), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor specific parameters can be customized free of charge according to customer needs, cast steel quenching and hardening treatment, surface plated with hard chromium; The bearing is a ball shaft roller bearing; Lubricating oil bath for bearings; Rotor speed: 0.05L: 36 revolutions per minute. Specific speed can be customized for free according to customer needs
5. Face wall: steel structure, drilling and heating, internal surface hardening and hard chrome plating treatment;
6. Bracket: Steel structure, inner surface hardened with hard chrome plating treatment;
7. Top bolt: cylinder driven, surface coated with hard chrome
8. End face seal: The sealing ring is made of high wear-resistant material, self-lubricating bearing, and hinge spring pressure top seal
9. Feeding hopper: manual operation
10. Control mode: manual operation, semi-automatic;
Internal mixer temperature: room temperature+10- tap water ° C
Mechanical body
11. The base frame is made of welded steel and steel plates, and processed into
12. The intermediate groove of the mixing chamber is made of wear-resistant alloy steel
The side wall is made of medium carbon steel plate welded and processed
13. Alloy steel is used for the axis and blades of the mixing shaft
14. The bearing seat is made of ZG20 steel, and the bearing uses roller bearings
15. Feeding device: This mechanical design is a front feeding device, and the pressure can be adjusted according to the user's specified pneumatic valve
16. The side end of the mixing shaft of the leak proof device adopts a mechanical shaft seal for tightening, and the leak proof structure has been certified
Sealing device
17. Made of pressed alloy steel, apply pressure to the raw materials during mixing operations, and use an air pressure cylinder to perform vertical lifting and lowering movements
Unloading device
18. Pneumatic tilting unloading of structural mixing chamber
19. The maximum tilt angle is 110 ° to 135 °
20. Tilting power: driven by cylinder
Transmission structure
21. The main motor has a 0.75KW AC voltage of 440V, 415V, 380V, 220V, and 110V, which can be selected according to customer needs
22. Transmission method: The main motor and reducer are connected for integrated transmission
Piping
23. Compressed air piping, compressed air fittings (three-point combination, solenoid valve), and mechanical body piping
Main electrical control equipment
24. Temperature setting: Both automatic and manual can be used
25. With prompt actions and various time settings, it can achieve forward and reverse rotation
Advantages of the machine
26. The main electrical components are imported brands, and the bearings of the whole machine are made of Timken TWB brand
27. The mixing shaft is made of alloy steel. Weld wear-resistant steel imported from West Germany to easily worn parts, making it more secure and durable
28. The mixing tank is "mountain" shaped, and the main body of the mixing tank is made of wear-resistant alloy steel processed as a whole. The shear part is welded with West German sharp steel
29. The side wall leakage prevention device adopts high-tech materials: the leakage prevention structure has won the certificate
30. The sealing plate adopts an "M" - shaped structure to make the rubber material more evenly mixed
31. Volume: (W × D × H) 1000 * 500 * 1580mm
32. Weight: 145KG