PC-3AⅡtype(PM10)

Pocket sized laser inhalable dust tester

overviewInhalable dust (PM10) analyzer

The TN-PC-1E Pocket Laser Inhalable Dust Continuous Tester (hereinafter referred to as the Pocket Dust Meter) is used for measuring the concentration of inhalable dust (PM10) in the air of public places and the number of dust particles with a particle size of 0.5-5.0 μ m per unit volume of air in clean environments. It is a new generation of intelligent measuring instrument for real-time and rapid measurement of the above items by the Centers for Disease Control and Prevention, health supervision, environmental dust monitoring and other departments.

This instrument is a small pocket sized measuring instrument that uses advanced light scattering principles and semiconductor lasers as measurement light sources to perform highly sensitive non-contact measurements of dust in the air. The entire testing process is managed and controlled by a single-chip microprocessor, using a high-resolution large screen high brightness LCD display with full Chinese language display.

This instrument has the advantages of small size, easy portability, fast testing speed, high sensitivity, good stability, light weight, simple operation, and dual-use of AC and DC. Suitable for measurement in situations without external power supply. It can be widely applied in various public places and fields such as electronics, optics, food, aerospace, and aviation.

SpecificationInhalable dust (PM10) analyzer

1. Measurement range of inhalable dust: 0.001~10mg/m ³;

2. Detection sensitivity: 0.001mg/m ³;

3. Measurement particle size range: 0.5-10 µ m particles;

4. Sampling time: 1 minute;

5. Data storage capacity: 200 sets of data;

6. Working environment: Temperature (0-35 ℃)

Humidity RH (20-70)%

7. Working power supply: 220V AC power supply;

Equipped with a high-capacity lithium battery, it can be used continuously for more than 2 hours after being fully charged.

10. Volume: 105mm × 215 mm × 50 mm;

11. Weight; About 500g