overview
The ZDLPF46 electronic electric fluorine lined single seat regulating valve is composed of a 381L series electronic actuator and a straight through single seat fluorine lined valve. The actuator adopts an integrated electronic controller module, which does not require additional servo amplifiers and has a high output force; The parts of the valve body that come into contact with the medium are all treated with high-pressure injection molding technology, lined with corrosion-resistant and anti-aging polytetrafluoroethylene (F46), and sealed with polytetrafluoroethylene corrugated pipes. Therefore, this valve is widely used in industries such as chemical, petroleum, metallurgy, pharmaceuticals, and power for process control of highly corrosive media such as acids and alkalis, as well as toxic and volatile gases, liquids, and media.

characteristic
Corrosion resistance: The valve body cavity, valve core, valve seat, and valve stem are all lined with 2.5-3mm thick F46, which can resist acid, alkali, and strong corrosion
Good sealing performance: The corrugated tube and packing made of polytetrafluoroethylene material are double sealed to ensure no leakage
Small leakage: Due to the soft sealing of the valve core and seat, the leakage is lower than the IV level standard

Material for main parts

Main technical parameters
Nominal diameter mm 20 25 32 40 50 65 80 100 125 150 200 250 300
Valve seat diameter mm 20 25 32 40 50 65 80 100 125 150 200 250 300
Rated flow rate
Coefficient Kv single seat 5 8 12 20 32 50 80 120 280 450 800 1200
Double seater 10 16 25 40 63 100 160 250 1600
Rated stroke L (mm) 10 16 25 40 60 100
Actuator model 3810L 381LS-8 381LS-20 381LS-30 381LS-50 381LS-65 381LS-99
PSL PSL201 PSL202 PSL204 PSL208 PSL312 PSL325
Explosion proof type 381LX-20 381LX-30 381LX-50 381LX-65 381LX-99
Power supply voltage AC220V 50Hz
Signal range 4-20mA DC 0-10mA DC or 1-5V DC 0-10V DC
Operating modes: electrically open (K) type, electrically closed (B) type
Fully open, fully closed, and self-locking in fault state
Flow characteristics such as percentage, straight line, and quick opening
Allowable leakage rate (L/h) for single seat valves: ≤ 10-4 times the rated capacity of the valve; Double seat valve: ≤ 10-3 times the rated capacity of the valve
Inherent adjustable ratio R 50:1
Nominal pressure PN (MPa) 1.6 2.5 4.0 6.4

Ordering Instructions
1. Product model and name 2. nominal diameter DN (mm) 3. nominal pressure 4. flow characteristics requirements 5. valve body material and valve trim material
6. Type of medium and temperature range 7. Pressure difference before and after the valve 8. Sealing form 9. Supporting accessories