Introduction to Wooden Tray Drying Room:

The wooden tray drying room can dry various types of wood and various specifications of wood. It has the advantages of high efficiency and energy saving, reliable case studies, short drying cycle, good drying quality, fully automatic control, and no need for dedicated personnel supervision. It is widely used in large, medium, and small wood processing enterprises, especially suitable for operating wood processing manufacturers. The Maichuang series wood specific drying equipment uses electricity to generate sufficient heat energy during normal operation, which is fully absorbed by the drying medium in the heat energy drying system, producing a temperature of about 50-120 degrees Celsius. Under the action of the circulating fan, the high-temperature air circulation process is required. Saturated wet steam can quickly make the surface temperature and internal humidity of wood consistent, thus achieving the goal of drying both the inside and outside of wood simultaneously. By using intermittent heating drying technology for wood with different individual sizes, defects such as internal cracking, end cracking, and deformation during the drying process are solved, greatly improving the yield of high-quality wood products. The wood drying equipment is equipped with a thermal energy circulation system, which significantly reduces labor costs and shortens the drying cycle. When the moisture content of the wood drops below 30-35, after high-temperature dry steaming, all parasitic insects and their eggs inside the wood can be eliminated, solving the adverse effects caused by insects and improving the economic efficiency of the enterprise. Through a unique moisture removal system, the drying speed of wood is faster and the quality is higher.

1、 Equipment composition

The wooden tray drying room uses electricity as the heat source, and the equipment consists of electric heating fins, radiator fins, high-temperature and high humidity resistant axial flow fans, diversion systems, circulation systems, control systems, and moisture removal systems.

2、 Working principle:

The power of the electric heating fin radiator in the drying room is related to its space, and the size of the heat dissipation volume can be calculated. The manufacturer selects high-quality electric heating fin tubes and uses aluminum (or stainless steel) fins on the surface to increase the surface area of the radiator and improve the heat exchange efficiency. By utilizing a fully automatic temperature control system, the temperature changes inside the drying oven were controlled, reducing the cost of manual control and improving the quality of drying. Reasonably adjust the hot air ventilation volume, evenly ventilate layer by layer, provide all-round hot air supply, no dead corners, so that the wood can be uniformly and uniformly dried, and run efficiently. Reduced the occurrence of wood deformation, internal cracking, and end cracking.

3、 Performance characteristics:
1. The drying room uses electricity as a heat source and uses an axial flow fan to heat the air through convection in the heat exchanger. The hot air layer flows through the wood for heat transfer, and fresh air enters the drying box from the air inlet for replenishment, and is then discharged from the dehumidification outlet, continuously replenishing fresh air and continuously discharging humid and hot air, in order to maintain an appropriate relative temperature inside the drying box and save energy. Most of the hot air circulates inside the box to complete the drying process.
2. Using a high-temperature and high humidity resistant axial flow fan to perform heat exchange on the surface of the finned radiator, as the area of the finned tubes on the radiator surface increases, the temperature distribution inside the drying box is relatively uniform through a hot air circulation system, allowing the wood to dry quickly in a pollution-free environment.
3. By utilizing a precise temperature and relative humidity control system, the surface temperature and internal humidity of the wood are made consistent, thereby achieving the goal of simultaneous drying of both the interior and exterior of the wood. The intermittent heating drying process is used to solve the problems of internal cracking, end cracking, deformation, and other defects that occur during the drying process of wood with different individual sizes. Accurate moisture content can better ensure that the quality of the product meets the standards. Greatly improve the yield of high-quality wood products. The wood drying equipment is equipped with a heat recovery system, which significantly reduces the drying cost and shortens the drying cycle. When the moisture content of the wood drops below 30-35, after high-temperature dry steaming, all parasitic insects and their eggs inside the wood can be eliminated, solving the adverse effects caused by insects and improving the economic efficiency of the enterprise.
4. Customized high-precision digital probes collect temperature and relative humidity. The temperature and humidity control accuracy is extremely high.
5. The device is easy and convenient to operate: customers only need to press the start button, and the device automatically controls the temperature and humidity in the baking room according to the set baking parameters or baking curve until the baking is completed, and emits a prompt sound. Greatly reducing the labor intensity of users.
6. Having a complete set of baking processes tailored to different products is beneficial for users to be able to dry high-quality products after receiving the equipment, helping them win economic benefits in the shortest possible time.
7. This product is made of colored steel plate, which is beautiful and durable, suitable for large, medium and small enterprises.
8. The hot air temperature can be adjusted and controlled between 35 ° C and 100 ° C according to the needs of different woods, achieving drying of various hardwoods, hardwood, cork, veneer, wooden boards, plywood, etc. This is achieved by controlling the steam input through an electromagnetic valve, with small temperature difference, fast drying speed, and high quality.
9. The use of wooden tray drying room can dry to the required final moisture content, without being limited by natural conditions. It has mature drying theory and process technology, which can ensure the quality of drying. Compared with air drying, it has a shorter drying cycle, higher production efficiency, smaller footprint, less complex equipment, long service life, safety and reliability, and good economic effect.
10. By using a moisture removal system to achieve forced moisture removal, the emission of exhaust gas can be accelerated and the drying speed can be accelerated.

Main technical parameters: (for reference only)