Product Name: Vacuum Oil Filter Cartridge

SS honeycomb filter element

Overview and Characteristics:
Honeycomb filter element is made by precisely winding textile fiber yarn on a porous skeleton, controlling the winding density and filter shape of the filter layer to produce filter elements with different filtration accuracies;
Can effectively remove suspended solids, particles, etc. from liquids;
The filter aperture is large on the outside and small on the inside, with excellent deep filtration effect and good compatibility;
Filter can be made of various materials to meet the needs of liquid filtration;
Purpose:
Suitable for filtering tap water, food and beverage water, cooling circulating water, boiler water supply, ultrapure water security filtration, chemical solutions, electroplating solutions, washing solutions, pharmaceutical preparation water, camera cleaning solutions, magnetic slurries, etc.
Main technical parameters:
Outer diameter: Ø 65-₂mm
Outer diameter: Ø 29+¹mm
Filter cartridge model description:

SS-P05P50N represents a filter element made of polypropylene winding and polypropylene skeleton, with an accuracy of 5u, a length of 500, and lined with nylon yarn

Note: The precision of the filter element is the nominal filtration precision.
The nominal filtration accuracy and the fairness of the initial filtration accuracy of the filter element. The filtering of the target particle size based on nominal accuracy is probabilistic filtering.

Example:

The filtration flow rate of the filter element: The filtration flow rate of the filter element is closely related to the type and accuracy of filtration, as well as the viscosity and temperature of the filtered medium.
Recommended flow selection filter: (standard filter L=250mm)
Surface water source pretreatment system: (10u~20u) 0.2-0.3T/branch
Groundwater pre-treatment system: (10u~20u) 0.4T/branch
Intermediate system (with good water quality): (1u~5u) 0.5T/branch

Product Name: VP-Melt blown filter element

Overview and Characteristics:
　　·VP filter element is made of polypropylene（PP）Made of melt blown ultrafine fibers.
　　·Has high porosity, low resistance, high flow rate, and high filtration efficiency;
Purpose:
Suitable for filtering pure water, food and beverage water, mineral water, configuration water, etc.
Main technical parameters:
Outer diameter:Ф65mm
Inner diameter:Ф30mm
Voltage resistance:0.4MPa
Temperature resistance:60℃
Rated flow rate(water)：5～20L/min
　　(The length of the filter element is250mmtime)
Filter cartridge model description:

Introduction to high-precision oil filter element:

By observing the overall shape and surface shape of the vacuum oil filter element, as well as the types of pollutants present on the surface, it is possible to predict the location of mechanical damage and the state of the oil, which can prevent mechanical accidents. Please refer to the table below for mechanical protection.

Changes in filter element	Take countermeasures	overall shape	surface shape
1. The accumulation of pollutants such as dust and oil residue on the surface	When dust, oil residue, and a small amount of metal powder can be seen on the filter element, it can be said that both the machine and the oil are in normal condition. If the filter element visibly turns black or yellow, please check the total acid value.
2. The situation where a large amount of metal powder accumulates on the surface	When there is a large amount of metal powder on the filter element, it is caused by the wear of the same components as the metal. Please check it as soon as possible.
3. Cracks appear on the surface of the filter element (very soft when used with fingers)	It can be considered that a large amount of water has been mixed into the oil. Please check the moisture content, investigate the cause, and repair it before use.
4. Cracks appear on the surface of the filter element (very hard when using fingers)	The filter element is saturated, please replace it as soon as possible.
5. The sinking of the filter element	The reason is that the pressure inside the oil filter is too high. Please check the connection and pressure on the outlet side. When the filter element feels soft, excessive water has been mixed in.
6. The overall size of the filter element becomes smaller	Due to the capture of oil pollutants exceeding the allowable amount, the pressure inside the oil filter has increased, causing deformation of the filter element. Please replace the filter element as soon as possible