Ultrasonic mud level gauge/Ultrasonic sludge interface analyzer

CS100B Ultrasonic mud level gauge,Ultrasonic sludge interface analyzer,The ultrasonic mud water interface instrument is designed for long-term reliable operation in the industrial and municipal fields. Sensor immersed in water5-10cmIt can work by using ultrasonic emission and echo analysis of suspended solids in water to determine the height of the sludge layer. Applied to water plants, sewage treatment plants, coal washing plants, power plants, and mining sites.

Product Overview:

CS100BThe ultrasonic mud water interface meter is designed specifically for continuous online monitoring of sludge interface position in sewage treatment processes. The instrument utilizes the reliable principle of ultrasonic echo detection to detect the distance between the sensor probe and the sludge interface, as well as the distance to the bottom surface, achieving0~10Real time monitoring of changes in the thickness of rice sludge and control of related process, in order to optimize sludge discharge control and dosing control, prevent deterioration of effluent, avoid sludge denitrification and decomposition, and optimize process control flow.

Product features:

★ Reliable ultrasonic echo measurement principle, easy to use;

★ Equipped with an automatic cleaning system, it reduces maintenance workload and improves work reliability;

★ The ultrasonic emission energy is automatically adjusted, which can adapt to various measurement media and a wide range;

★ Advanced circuit design software algorithms can eliminate on-site interference and achieve stable and accurate measurements;

★ The large screen LCD displays the measured values while also displaying the sludge stratification status graphically;

★ Chinese menu, easy to operate;

★4~20mAIsolation current output;

★ Optional fieldbus interface;

★ Output of upper and lower limit alarms and fault alarm relays.

Technical Parameter

tie construct Split type type name XHFS04

resolution 1mmor0.3%(Choose the bigger one) measure Cheng 5Rice10Rice15Rice20Meter, maximum is100rice

Analog Output 4～20mA/500Ω load measurement accuracy ±3%~5%

offerings electricity 220VAC 50Hz apparent show Chinese LCD display

Relay (This is an optional accessory)The maximum is2group ambient temperature Display instrument:-20～+60℃；

try to find out Head:-20～+80℃

protection grade display instrumentIP65, probeIP68 open up or clear out by poking or jabbing letter optional485，232communication(MODBUSagreement)

Install probe Based on the range and probe selection Probe cable 10rice

Application scope

Applied in the following places:

Water plant: sedimentation tank;

Sewage treatment plant: primary sedimentation tank, secondary sedimentation tank, concentration tankSBRProcess hydrolysis tank;

Coal washing plant: sedimentation tank;

Power plant: mortar sedimentation tank;

Mining plant: concentration tank;

Example of on-site installation

Parameters that need to be understood for options

1.The type of medium being measured, liquid or solid.

If it is liquid: whether there is steam, fog, foam, wave, agitation and floating objects on the liquid surface;

If it is a solid: whether there is dust.

2.The minimum to maximum temperature and pressure of the medium.

3.The corrosiveness of the medium, if placed in a can, requires knowledge of the material of the can and whether there is a corrosion-resistant lining.

4.Do you need explosion-proof and anti-corrosion measures.

5.What is the measurement range and what is the required blind spot.

6.Work environment: such as open pools, covered pools, horizontal tanks, vertical tanks, spherical tanks, whether the tanks are at atmospheric pressure, etc.

7.Working voltage:24VDCstill220VAC.

8.Output signal:4～20mACurrent485Communication output or relay output.

9.Equipment form: Split type