UWT cable level gaugeBy driving the steel belt/cable reel with a motor, the induction hammer at the end of the steel belt/cable is lowered into the interior of the silo. When the induction hammer touches the surface of the material, the lever pulley moves, and the motor reverses to pull the induction hammer back to the top stop position, outputting an analog signal corresponding to the material level;
Application conditions:
Continuous real-time monitoring of various solid or liquid materials or measurement of solid-liquid interfaces (sludge interface, sediment interface)Performance characteristics:
Suitable for almost all solid and liquid materials
Simple, reliable, and maintenance free measurement principle
International certification applicable for use in potentially explosive environments (dust explosion prevention)
Cast aluminum shell with anti-corrosion coatingProtection level IP66, completely isolated from electronics and machinery
Adopting special steel belt or steel cable transmission methods to avoid cable jamming and hammering
Adopting a lever type pure mechanical action response method to avoid dust interference, faster response speed, and avoid burying hammers
Adopting a unique brushless motor with a pulling force of up to 3000N
Steel strip integrated pop-up cleaner to avoid the influence of sticky materials
Intelligent self diagnosis and self struggle function
Easy installation and debugging, capable of remote startup measurement
Comes with five sets of functional relays
Optional liquid receiving components with anti-corrosion coating, various induction hammers to choose from, internal heater, extended protective sleeve, etc
CE,ATEX,FM/CSA,IEC-Ex,TR-CU
UWT cable level gaugeExplosion proof form:
dust ignition-proof
Process conditions:
Range 30m (cable type)/40m (belt type)/50m (belt type), temperature 80 ℃/150 ℃/250 ℃/400 ℃, pressure 1.7 bar
Electrical parameters:
Power supply voltage 98... 253VAC/20... 28VDC, signal output 0/4-20mA, relay pulse, electronic counting pulse 1cm
Bus communication MODBUS RTU, PROFIBUS DP
Mechanical parameters:
Thread/flange, stainless steel 301/303/304/316L, PA anti-corrosion coating;
Standard motor 800N, measuring speed 15m/min; Brushless motor 3000N, measuring speed 20m/min;
Various hammer heads to choose from