VIP member
Transmission Load and Protector Testing System
Host Introduction: Motor Type Testing System
Product details
Transmission Load and Protector Testing System
|
Requirements Analysis
|
||
|
1、 Customer Products
|
Transmission Load and Protector Testing System
|
|
|
2、 Customer demand
|
Motor type testing system
|
|
|
3、 Product parameters
|
1. Transmission input parameters: maximum speed: 1000rpm, maximum torque: 100Nm
Output range: Torque range: 1000 Nm Speed: 50rpm
|
|
|
4、 Mechanical
|
1. Cast iron platform (including T-slot)
|
|
|
2. Magnetic powder braking loading
|
||
|
3. Equipped with water cooling system
|
||
|
5、 Electrical
|
Torque, speed, output power
|
|
|
6、 Software functional testing
|
1. Steady state test
|
1. No load
|
|
2 loads
|
||
|
3 Overload
|
||
|
7、 Reference standards
|
1. Aerospace component maintenance
|
Non standard special
|
Quotation for Motor Type Test System
|
serial number
|
physical properties
|
subsystem
|
Device Name
|
Technical Requirements
|
Specification Model
|
unit of quantity
|
|
|
1
|
machine
|
mechanical platform
|
1. Drive motor
|
11KW,100Nm
|
VIP-160
|
1 set
|
|
|
2
|
2 Torque sensors
|
Torque: 100Nm, speed 6000rpm
|
JN388-100A
|
1 unit
|
|||
|
3
|
3 Magnetic Powder Brake
|
1000Nm， Speed 1000rpm, absorbed power, 10KW water-cooled
|
FZ1000
|
1 unit
|
|||
|
|
4 Torque sensors
|
Torque: 1000Nm, speed 1000rpm
|
JN388-1000AE
(Low speed 1024)
|
1 unit
|
|||
|
4
|
5 Calibration Tools
|
100/1000Nm calibration measuring arm and weight
|
standard configuration
|
1 set
|
|||
|
6
|
6 Cast iron platform
|
2000*1500*150(mm)
|
HT200含T槽
|
1 unit
|
|||
|
7
|
7 Couplings
|
Coupling between load motor and dynamometer
|
定制
|
2 sets
|
|||
|
8
|
8 tested motor end fixtures
|
Used for mechanical firmware assembly (fixing the tested product)
|
定制
|
2 sets
|
|||
|
9
|
9 Protective Shield (B-2281)
|
protective device
|
定制
|
2 sets
|
|||
|
10
|
10 Water cooling system
|
Including water pipes, water tanks, and water pumps
|
standard configuration
|
1 set
|
|||
|
11
|
Electrical hardware
|
Cabinet 1
|
1. Two door piano cabinet
|
1. Including contactors, electrical switches, wiring, and hubs
|
DJC-1300
|
1 set
|
|
|
Additionally, industrial computers and displays are also installed inside the cabinet
|
|||||||
|
|
|
2 hubs
|
When configuring multiple (≥ 2) dynamometers, users can choose the VG2218C-JXQ type 8-way hub, which can be operated by computer software or VG2218C to select the specified dynamometer (or workstation)
|
VG2218C-JXQ
|
1 set
|
||
|
14
|
2 measurement units
|
5 dynamometer controller
|
1. Control the loading of magnetic powder dynamometer
|
VG2218C
|
2 units
|
||
|
2. Measure the output torque, speed, and power of the motor
|
|||||||
|
15
|
3 Information supporting units
|
6 industrial computer
|
2G memory, 500g hard drive, DVD drive, USB interface
|
IPC-8406
|
1 unit
|
||
|
16
|
7 displays
|
Lenovo 17 inch LCD
|
|
1 unit
|
|||
|
17
|
upper computer software
|
1. Steady state test
|
1. No load
|
Test without adding load, observe the relevant parameters of the gearbox operation.
|
VB1.0
|
1 set
|
|
|
2 loads
|
Test the load and observe the relevant parameters of the gearbox operation.
|
||||||
|
3 Overload
|
Test the overload tested torque protector and observe the relevant parameters of the motor operation.
|
||||||
|
18
|
power supply
|
1 Power supply unit
|
1. Drive Transformer
|
Provide power to the tested product
|
11kw
|
1 unit
|
|
|
19
|
Installation materials
|
cable
|
power cable
|
|
|
1 set
|
|
|
20
|
Freight and on-site debugging
|
|
|
Once
|
|||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-