◆ No need for temperature and pressure compensation, directly measure mass flow rate

◆ Suitable for large caliber and small flow rate

◆ Neglecting pressure loss

◆ No movable parts, high stability

◆ Corrosion resistant sensor, compatible with corrosive gases

measuring principle

The Tmass gas mass flowmeter is calibrated using a standard precision wind tunnel and follows the golden law of thermal dissipation (cooling) effect based on the principle of constant temperature difference. It can display both flow rate and temperature simultaneously. Low flow rate response is sensitive, and high flow rate can also achieve good accuracy. Even at high temperatures, it can achieve good temperature difference and stability.

application

Air, natural gas, biogas, coal gas, dry chlorine gas, oxygen, flue gas, torch gas, argon gas, and other dry gases.

Technical Parameter

Range: 0-60Nm/s

Accuracy: ± 1% reading ± 0.5% full-scale

Range ratio: 1 00:1

Response time: 2 seconds, adjustable by damping coefficient

Environmental temperature: with LCD -20~70 ℃

Without LCD -40~85 ℃

Medium temperature: -20~400 ℃

Work pressure: 0-2.5MPa (beyond consulting with the manufacturer)

Analog output: Two channels of 4-20mA (flow rate and temperature)

A 4-20mA line with HART communication

Digital outputs: HART and MODBUS

Repeatability: ± 0.5% F.S

Temperature coefficient: 0.05%/10 ℃

Material compatibility: Shell: cast aluminum, epoxy resin spray coating, nitrile rubber O-ring

Protection level: IP67

Humidity: 0-100% RH

Explosion proof grade: NEPSI explosion-proof license EXdIICT4, explosion-proof

Power supply: 24VDC

Electromagnetic compatibility: IEC 61000-4-2~5

Process connection: flange installation thread installation