
The wire shielding cover electrode is developed based on the requirements of the Chinese power industry standard DL/T976-2005 "Preventive Test Regulations for Live Working Tools, Devices and Equipment" issued by the National Development and Reform Commission of the People's Republic of China. All indicators of the product meet the national standard requirements. The test bracket adopts a high voltage and waterproof insulation rod as the support. The experimental electrode adopts a high-strength metal cylindrical rod, which has characteristics such as oxidation resistance, wear resistance, and high conductivity.
Wire shielding cover electrode
1. The combined wire shielding cover electrode should be suitable for rubber wire shielding cover and operating rod type polymer wire shielding cover.
2. The external electrode should be made of 304 stainless steel, and the stainless steel bracket supports and connects the external electrode to the grounding electrode.
3. The internal electrode must be made of stainless steel tube and equipped with insulation end high-voltage line protection. The high-voltage line should be led out using standard connectors.
Product parameters
1. Usage: Non fixed placement for use,
2. Environmental temperature: -25 ℃ to+40 ℃
3. Most High wind speed: not exceeding 34 m/s (equivalent to a wind pressure of 700Pa)
4. Continuous running time: Can run continuously
5. The relative humidity of the environment (at 25 ℃) is less than 90%
6. Rated voltage of the system: unlimited
7. High voltage electrode: 1.5m soft chain with steel balls at both ends
8. Polar plate: steel rod with a diameter of 25mm * 1000m
9. The most High voltage withstand value: 110KV
10. Specification: 1240mm * 205mm * 1240mm
11. Weight: 7.5KG