Changzhou Jintan Taina Instrument Factory
Home>Products>TN-PC-3E Laser Inhalable Dust Continuous Tester
TN-PC-3E Laser Inhalable Dust Continuous Tester
The TN-PC-3E laser inhalable dust continuous tester has the advantages of small size, easy portability, fast testing speed, high sensitivity, good sta
Product details


TN-PC-3E
Laser inhalable dust continuous tester

overview
The TN-PC-3E laser dust analyzer is used to measure the concentration and cleanliness of inhalable dust (PM10, PM2.5) in the air of public places, with a particle size of (0.3-5.0) μ m per unit volume of air. It is a new generation of intelligent measuring instrument for real-time and rapid measurement of the above items by the Centers for Disease Control and Prevention, health supervision, environmental dust monitoring and other departments.
This instrument is a small portable measuring instrument that uses advanced light scattering principles and semiconductor lasers as the measurement light source to perform highly sensitive non-contact measurements of dust in the air. The entire testing process is managed and controlled by a single-chip microprocessor, using a high-resolution large screen high brightness LCD display with full Chinese language display. The instrument is also equipped with environmental temperature and relative temperature testing devices to facilitate users' inspection of the detection environment.
This instrument has the advantages of small size, easy portability, fast testing speed, high sensitivity, good stability, light weight, simple operation, and dual-use of AC and DC. Suitable for measurement in situations without external power supply. It can be widely applied in various public places and fields such as electronics, optics, food, aerospace, and aviation.

Specification
1. Dust measurement levels: PM10, PM5, PM2.5, and total dust (TSP); Equipped with a 40MM filter membrane online sampler;
2. Measurement range of inhalable dust: 0.001~10mg/m ³; The maximum range in TSP mode is 100mg/m ³;
3. Detection sensitivity: 0.001mg/m ³; Repetitive error: ≤± 2%;
4. Measurement particle size range: (0.3, 0.5, 0.7, 1.0, 2.5, 5.0) µ m displayed in six levels simultaneously;
5. Air sampling flow rate: 2.83L/min (0.1 ft 3/min);
6. Sampling time: 1 minute, 2 minutes... 30 minutes; And manually at any time. Direct reading of dust mass concentration (mg/m ³);
7. Having public place detection mode, atmospheric environment detection mode, and labor hygiene mode;
8. Can calculate the Time Weighted Average (TWA) and Short Term Exposure Allowable Concentration (STEL), etc;
9. Equipped with the function of setting alarms for excessive dust concentration; The concentration value can be set arbitrarily;
10. Automatic humidity correction;
11. Data storage capacity: 1000 sets of data, can be queried and printed at any time;
12. Connect to a computer to achieve massive data storage, network transmission, remote monitoring, and printing of test results;
13. The instrument is equipped with a programmable clock chip to provide accurate date and time information for measurement;
14. Working environment: temperature (0-35 ℃), humidity RH (20-70)%;
15. Working power supply: 220V AC power supply; Built in high-capacity lithium battery, can be used continuously for more than 5 hours after fully charged;
16. Instrument configuration temperature and humidity sensor (optional accessories);
17. Volume: 250mm × 190mm × 70mm;
18. Weight; About 900g

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!