Suspended solids concentration meterWidely used in industries such as water plants (sedimentation tanks), paper mills (pulp concentration), coal washing plants (sedimentation tanks), power plants (mortar sedimentation tanks), sewage treatment plants (inlet and outlet, aeration tanks, return sludge, primary sedimentation tanks, secondary sedimentation tanks, concentration tanks, sludge dewatering).
The suspended solids measuring instrument emits light waves through a sensor transmitter, which are absorbed, reflected, and scattered by the measured object during transmission. Only a small portion of the light can reach the receiver. The transmittance of the transmitted light is proportional to the concentration of the measured wastewater, and the concentration of the wastewater is calculated by measuring the transmittance of the transmitted light.

controller |
sensor |
notes |
||
technologyparameter |
Data indicators |
technologyparameter |
Data indicators |
Abnormal alarms and power outages will not result in data loss. Touch screen display and command input. After abnormal reset and power outage, the instrument will automatically discharge residual reactants and restore working status.
|
measuring range |
0-5-30g/L (expandable) |
material |
316 stainless steel |
|
Measurement unit |
Mg/L and g/L automatic switching |
cable |
Waterproof cable |
|
Display mode |
LCD |
Installation method |
Immersion type, pipe insertion type |
|
accuracy |
±2%FS |
External dimensions |
Ф50×220mm |
|
resolution |
0.01% |
Medium pressure |
≤3bar |
|
repeatability |
±1% |
Signal cable |
10M (standard) |
|
power supply |
85~265V,50/60Hz |
protection grade |
IP68 |
|
Analog Output |
2-channel 4-20mA current signal isolated output, load 750 ohms |
operation temperature |
0~60℃ |
|
Communication output |
RRS485, RS232 (optional) |
|
|
|
External dimensions |
99*99*130mm |
|
|
|
Dimension |
93*93mm |
|
|
|
The suspended solids concentration meter adoptsMulti beam RD measurement technology compensates for the effects of ambient light, fouling, and component aging;Multi point calibration ensures accuracy within a wide measurement range;Output of various variables such as current and relays, and intelligent control of the system;There are various installation methods such as immersion and pipe insertion.
Suspended solids concentration meter: http://www.wxdct.cn/c_html_products/1060-522.html