Air Thermal Aging Test Chamber Ventilation Aging Chamber

QZ-100E

This experimental equipment prohibits:

① Testing or storage of samples of flammable, explosive, and volatile substances

② Testing or storage of corrosive substance samples

③ Testing or storage of biological samples

④ Testing or storage of strong electromagnetic emission source samples

100L

W500*H500*D400mm

W1000*H1300*D700mm

About 110kg

Under the conditions of an ambient temperature of+25 ℃, relative humidity ≤ 85%, and no sample in the test chamber

GB/T 5170.2-1996 Temperature testing equipment.

RT+10 ℃ →+300 ℃ (RT refers to room temperature)

&plsmn; 0.5℃

&plsmn; 2.0 ℃ (unloaded)

RT+10 ℃ →+300 ℃ for approximately 35 minutes

999H/59M

The ventilation rate can be adjusted from 5-300 times/hour, within 80Measure during the ℃ test.

Diameter 250mm

8-10rpm adjustable

①GB/T 2423.2-2001 Test B: High temperature test method

②GJB 150.3-1986 High Temperature Test

③Complies with L1581SECT420.9、 ASTM-D2436, CNSS3556, CNS742, S7212 test standards.

①Outer wall material: stainless steel surface treated with baking paint

② Inner wall material: stainless steel plate SS # 304

③ Box insulation material: 100mm high-density glass fiber

④ Box door insulation material: 100mm high-density fiberglass

①Imported axial flow fan: 1 unit/120W

② Heater, adjustable air deflector, temperature sensor

③Micro speed controlled blower

Detachable rotating test bench (adjustable speed)

①Single panel door,Open outward, with the hinge on the left and the handle on the right (when facing the front of the box).

②Three layer high-temperature resistant tempered glassWindow observation light (Philips 11W)

Controller control panel, over temperature protection setter, main power switch, timer, power timer, operation indicator light

Distribution board, cooling fan, main power switch device

① Fin type heat dissipation tube shaped stainless steel electric heater

② Heating control method: SSR (Solid State Relay) contactless equal period pulse width modulation

③ Heating power: approximately 3.4KW

Located on the back of the box

7. Control system

7.1. Controller

Korean ternary button temperature controller (ST-170)

M measuring device (except PHH101-SP8, PV221CSA-J, PV221CSA-T)

7.2. Operation mode

Fixed value operation

7.3. Temperature display digits

0.1℃

7.4. High temperature setting

300℃

7.5. High time setting

999H59MIN

7.6. Temperature input type

Platinum thermocouple K-type

7.7. Control mode

PID Calculus Control

7.8. Auxiliary Functions

Input wire breakage detection function, timer (can manually control heating or not heating when the time is up), upper limit temperature overheating alarm function, buzzer alarm function, automatic temperature overheating prevention function, alarm number display function, and continue operation function after power failure recovery.

8. Safety protection device

Adjustable over temperature protection device

Extreme overheating of air conditioning channel

Fan motor overheating

Main power phase sequence and phase loss protection

Leakage protection

Heating tube windless dry burning protection

Overload and short circuit protection

power-off protection

9. Transportation

The test box is of integral type and can be transported as a whole

Large transport size (excluding packaging): see&ldqo; External dimensions&rdqo;

Large transportation weight (excluding packaging): see&ldqo; Weight&rdqo;

10. Usage conditions

The user guarantees the following conditions

The ground is flat and well ventilated

There is no strong vibration around the equipment

There is no strong electromagnetic field around the equipment

There are no flammable, explosive, corrosive substances or dust around the equipment

Power Supply

power capacity

large current

power switch

AC220V single-phase two-wire+protective earth wire

Voltage allowable fluctuation range: AC (220&plsmn; 22) V

Allowable frequency fluctuation range: (50&plsmn; 0.5) Hz

Approximately 3.5 KWA

12 A

16Ａ