Dongguan Qinzhuo Environmental Testing Equipment Co., Ltd
Home>Products>Supply ventilation aging box electrical insulation material heat resistance test box
Supply ventilation aging box electrical insulation material heat resistance test box
The supply of ventilation aging box electrical insulation material heat resistance test box is suitable for industries such as national defense, aviat
Product details

Supply ventilation aging box electrical insulation material heat resistance test box

  • product name
  • Air Thermal Aging Test Chamber Ventilation Aging Chamber

  • Product model
  • QZ-100E

  • Sample limitations
  • This experimental equipment prohibits:

    ① Testing or storage of samples of flammable, explosive, and volatile substances

    ② Testing or storage of corrosive substance samples

    ③ Testing or storage of biological samples

    ④ Testing or storage of strong electromagnetic emission source samples

  • Supply ventilation aging box electrical insulation material heat resistance test box

    Volume, size, andweight
  • Nominal internal volume
  • 100L

  • Internal dimensions
  • W500*H500*D400mm

  • External dimensions
  • W1000*H1300*D700mm

  • weight
  • About 110kg

  • Air Thermal Aging Test Chamber Ventilation Aging Chamber

    performance
  • Test environment conditions
  • test method
  • Under the conditions of an ambient temperature of+25 ℃, relative humidity ≤ 85%, and no sample in the test chamber

    GB/T 5170.2-1996 Temperature testing equipment.

  • temperature range
  • RT+10 ℃ →+300 ℃ (RT refers to room temperature)

  • temperature fluctuation
  • &plsmn; 0.5℃

  • Temperature deviation
  • &plsmn; 2.0 ℃ (unloaded)

  • Heating time
  • RT+10 ℃ →+300 ℃ for approximately 35 minutes

  • Timing setting range
  • 999H/59M

  • air changes
  • The ventilation rate can be adjusted from 5-300 times/hour, within 80Measure during the ℃ test.

  • Wheel size
  • Diameter 250mm

  • Test bench speed
  • 8-10rpm adjustable

  • Meet the testing standards
  • GB/T 2423.2-2001 Test B: High temperature test method

    GJB 150.3-1986 High Temperature Test

    Complies with L1581SECT420.9、 ASTM-D2436, CNSS3556, CNS742, S7212 test standards.

  • structure characteristics
  • Thermal insulation enclosure structure
  • Outer wall material: stainless steel surface treated with baking paint

    ② Inner wall material: stainless steel plate SS # 304

    ③ Box insulation material: 100mm high-density glass fiber

    ④ Box door insulation material: 100mm high-density fiberglass

  • Air conditioning channel
  • Imported axial flow fan: 1 unit/120W

    ② Heater, adjustable air deflector, temperature sensor

    Micro speed controlled blower

  • Standard configuration of test chamber
  • Detachable rotating test bench (adjustable speed)

  • Box door
  • Single panel door,Open outward, with the hinge on the left and the handle on the right (when facing the front of the box).

    Three layer high-temperature resistant tempered glassWindow observation light (Philips 11W)

  • control panel
  • Controller control panel, over temperature protection setter, main power switch, timer, power timer, operation indicator light

  • Distribution control cabinet
  • Distribution board, cooling fan, main power switch device

  • heater
  • ① Fin type heat dissipation tube shaped stainless steel electric heater

    ② Heating control method: SSR (Solid State Relay) contactless equal period pulse width modulation

    ③ Heating power: approximately 3.4KW

  • Power cord hole
  • Located on the back of the box

    7. Control system

    7.1. Controller

    Korean ternary button temperature controller (ST-170)

    M measuring device (except PHH101-SP8, PV221CSA-J, PV221CSA-T)

    7.2. Operation mode

    Fixed value operation

    7.3. Temperature display digits

    0.1

    7.4. High temperature setting

    300

    7.5. High time setting

    999H59MIN

    7.6. Temperature input type

    Platinum thermocouple K-type

    7.7. Control mode

    PID Calculus Control

    7.8. Auxiliary Functions

    Input wire breakage detection function, timer (can manually control heating or not heating when the time is up), upper limit temperature overheating alarm function, buzzer alarm function, automatic temperature overheating prevention function, alarm number display function, and continue operation function after power failure recovery.

    8. Safety protection device

  • Chamber
  • Adjustable over temperature protection device

    Extreme overheating of air conditioning channel

    Fan motor overheating

  • other
  • Main power phase sequence and phase loss protection

    Leakage protection

    Heating tube windless dry burning protection

    Overload and short circuit protection

    power-off protection

    9. Transportation

    The test box is of integral type and can be transported as a whole

  • size
  • weight
  • Large transport size (excluding packaging): see&ldqo; External dimensions&rdqo;

    Large transportation weight (excluding packaging): see&ldqo; Weight&rdqo;

    10. Usage conditions

    The user guarantees the following conditions

  • installsite
  • The ground is flat and well ventilated

    There is no strong vibration around the equipment

    There is no strong electromagnetic field around the equipment

    There are no flammable, explosive, corrosive substances or dust around the equipment

  • environmental condition
  • Temperature: 5 ℃~35 ℃ ② Relative humidity: ≤ 85% ③ Air pressure: 86kPa~106kPa
  • Power supply conditions
  • Power Supply

    power capacity

    large current

    power switch

    AC220V single-phase two-wire+protective earth wire

    Voltage allowable fluctuation range: AC (220&plsmn; 22) V

    Allowable frequency fluctuation range: (50&plsmn; 0.5) Hz

    Approximately 3.5 KWA

    12 A

    16A

    Online inquiry
    • Contacts
    • Company
    • Telephone
    • Email
    • WeChat
    • Verification Code
    • Message Content

    Successful operation!

    Successful operation!

    Successful operation!