The flash evaporator can achieve liquid and gas sample injection using the same valve
Power supply: 220VAC, 50Hz.
high throughput
System blowing reduces cross contamination
The sample flow into the chromatography can be freely turned off
Controllable injection volume
We provide you with consistent and accurate gas sample injection through our proprietary vaporization technology. Other sample vaporization equipment uses a larger volume gas path system, which causes the sample to be segmented during vaporization, resulting in incomplete sample analysis and errors. The vaporizer can effectively control the injection volume, ensuring that all components in the liquid sample can be effectively vaporized and enter the gas chromatography simultaneously. The liquid vaporization sampler is not only more convenient than traditional liquid injection valves, but also provides more accurate results. This eliminates the density variation caused by traditional liquid sample injection valves, which leads to analysis errors.Design with user adjustable heater. A separate heater is used to insulate a 30 "(approximately 76.2 cm) long sample pipeline with an inner diameter of 1/16" to prevent the sample from re condensing after gasification.

Note: If impurities are dissolved in the sample and cannot be vaporized, it may cause blockages in the pipeline. The product warranty does not cover pipeline maintenance work in this situation.

Flash evaporatorSystem requirements:

The chromatograph needs to be equipped with a gas injection valve

Available external connection ports for the chromatograph

There are available valve positions on the chromatograph

Minimum injection pressure: 300 PSI (approximately 20.7 barg)

Flash evaporatorcharacteristic:

Maximum gasification temperature: 150 ℃

Maximum liquid injection pressure: 400 PSI (approximately 27.5 barg)*

Maximum gas injection pressure: 100 PSI (approximately 6.9 barg)

Maximum Drive Air Inlet Pressure: 65 PSI (approximately 4.5 barg)

The standard gas selection valve group can be easily installed on the gas chromatography analyzer

 fused silica liner line for sulfur analysis

*Flash evaporatorCustomization can be made according to special requirements to withstand liquid injection pressures up to 1000 PSI (approximately 69.0 barg). Size: Width x Depth x Height=10 "x20" x8 "(approximately 20.3 x 50.8 x25.4 centimeters)

Weight: Approximately 25 pounds (approximately 11.3 kilograms)

Power supply: The equipment will be designed with a standardized power system according to the electricity requirements of the user's country during manufacturing.