VIP member
Stereoscopic microscope fluorescent lamp
Brief introduction: The fluorescent light source of the stereo microscope has excellent characteristics such as long lifespan, stability, and no flick
Product details
Details introduction:
The fluorescent light source of the stereo microscope has excellent characteristics such as long lifespan, stability, and no flicker. Install a fluorescent lamp at the lower end of the objective lens of the stereo microscope. Within the field of view, the light is uniform and sufficient, which can meet the customer's observation of the observed object under non glaring and non dazzling environmental light conditions. For situations where there is strong reflection under LED light source, fluorescent light source can be used, with soft brightness and clear observation.
When using fluorescent light sources, the following aspects should be noted:
When using fluorescent light sources, the following aspects should be noted:
1. Do not switch the lights on and off too frequently. Frequent lighting can cause premature blackening at both ends of the lamp, affecting the output power of the lamp. It is also important to wait for 5-15 minutes to restart the lamp after turning it off.
2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of lighting, causing many point like pollutants inside the lamp and becoming one of the causes of lamp damage. Therefore, it is recommended to turn on the lamp under high voltage conditions as much as possible.
3. Fluorescent lamps have multiple circuits and require auxiliary components, so they must be used in conjunction with corresponding transformers, capacitors, etc. to ensure that the lamp starts at the appropriate power.
4. Pay attention to maintaining a well ventilated environment, not only to remove dust, but also to lower the temperature of the lamp to extend its lifespan.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-