Split type trace oxygen analyzer-Global supplier

401, 4th Floor, Building 5, Zhengzhou Yida Technology New City, Jinzhan Street, High tech Zone, Zhengzhou City

Details introduction:

Split type trace oxygen analyzerWidely used for online detection and analysis of oxygen content in industries such as air separation nitrogen production, smelting, healthcare, petrochemicals, electronics and power.

Split type trace oxygen analyzerMain features:

1） Friendly human-machine dialogue menu, intuitive and convenient operation;
2） Chinese and English menus, users can freely switch;
3） Adopting imported zirconia oxygen sensors, it has the characteristics of no power consumption, high measurement accuracy, long calibration interval, fast response speed, and small zero drift;
4） Calibration at any point within the range is sufficient, without the need for multiple calibration points, to meet the measurement accuracy of the entire range;
5） Restore the factory settings function to prevent confusion in analyzer parameter settings caused by misoperation;
6） Automatic data storage function, allowing customers to freely access historical data;
7） The upper and lower limit alarm points can be set arbitrarily within the full range;
8） standardRS232(default) orRS485Communication interface, capable of bidirectional communication with computers (optional).

Technical parameters of split type trace oxygen analyzer:

measuring principle	Zirconia dioxide
Display mode	128×64dot matrixLCD
Range optional	0 ~ 10/100/1000ppm，1%，25%₂
O	resolution
0.1ppm	measurement accuracy 0~1000ppm /1.00%/10.00% /25.00% ≤±1% FS 0~100ppm ≤±2% FS
0~10ppm ≤±5%FS	repeatability
≤±1%	response time₉₀T＜
30S	Analog Output4~20mA.DC500(Non isolated output, load resistance less than) Ohm)0-10VOutput (non isolated output, load resistance greater than)10K 1Ohm)Programmable dry contact type passive alarm output with large capacity contacts
220VAC/2A	communication interfaceRS232(default) or
RS485	Working power supplyexchangeAC170 ~265V 50/60HzPower consumption is less than
10VA	ambient temperature-10 ~ +50
℃	ambient humidity80＜％
RH	Sample gas temperature0 ~ 200℃
(When the sampling pipeline is made of stainless steel)	Sampling method
Insertion type (diffusion type)	Sample gas pressure86-106KPa
Stable pressure atmosphere	Sample gas componentsNo flammable gas, no corrosive gas, dust content less than³
1mg/Nm	Specification and sizemeter,155mm×155mm×118mm（H×W×D
）	Dimension135mm×135mm（H×W
）	service life24＞
Month (under normal usage conditions)	Gas interfaceNPT 1/8
internal thread	Installation method

Embedded installationDisclaimer: Product Introduction on This Website(Including product images, product descriptions, technical parameters, etc)