Jiangsu Changshun Instrument Co., Ltd
Home>Products>Split type steam flowmeter
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13770421007
  • Address
    Jinhu County Industrial Park, Jiangsu Province
Contact Now
Split type steam flowmeter
Introduction to Split type Steam Flow Meter: Jiangsu Changshun Instrument's split type steam flow meter has both analog standard signals and digital p
Product details


Split type steam flowmeter



1Introduction to Split type Steam Flow Meter
Jiangsu Changshun Instrument
Split type steam flowmeterIt has both analog standard signals and digital pulse signal outputs, making it easy to use in conjunction with digital systems such as computers. It is an ideal high-precision flow meter. Mainly used for flow measurement of industrial pipeline media fluids, such as gases, liquids, vapors, and other media. Its characteristics are small pressure loss, large range, high accuracy, and almost unaffected by parameters such as fluid density, pressure, temperature, viscosity, etc. when measuring volumetric flow rate under working conditions. No movable mechanical parts, therefore high reliability and low maintenance. The instrument parameters can remain stable for a long time. The vortex flowmeter adopts a piezoelectric stress sensor with high reliability and can operate within a temperature range of -20 ℃ to+250 ℃.

IISplit type steam flowmetermodel selection

Measurement medium: gas, liquid, vapor
◆ Caliber specifications: Flange card mounted caliber selection: 25, 32, 50, 80, 100
◆ Flange connection type with a diameter selection of 100, 150, 200
◆ Flow measurement range Normal measurement flow velocity range Reynolds number 1.5 × 104~4 × 106; Gas velocity of 5-50m/s; Liquid 0.5-7m/s
The normal measurement range for liquid and gas flow is shown in Table 2; The steam flow range is shown in Table 3
Measurement accuracy: 0.9999 level, 1.49999 level
◆ Temperature of the tested medium: normal temperature -25 ℃~100 ℃
◆ High temperature -25 ℃~150 ℃ -25 ℃~250 ℃
Output signal pulse voltage output signal high level 8-10V low level 0.7-1.3V
The pulse duty cycle is about 50%, and the transmission distance is 100m
Pulse current remote transmission signal 4-20 mA, transmission distance of 1000m
◆ Instrument operating environment temperature: -25 ℃~+55 ℃ humidity: 5-90% RH50 ℃
◆ Material: Stainless steel, aluminum alloy
◆ Power supply DC24V or lithium battery 3.6V
Explosion proof grade intrinsic safety type iaIIbT3-T6
Protection level IP65


III
Split type steam flowmeterProduct Selection

code

orifice

Flow range ㎡/h

25

DN25

1-10 (liquid)

25~60 (gas)

Please refer to the instruction manual for steam flow rate. For DN300 and above, it is recommended to use a plug-in vortex flowmeter

32

DN32

1.5~18 (liquid)

15~150 (gas)

40

DN40

2.2~27 (liquid)

22.6-150 (gas)

50

DN50

4~55 (liquid)

35~350 (gas)

80

DN80

9-135 (liquid)

90~900 (gas)

100

DN100

14-200 (liquid)

140~1400 (gas)

150

DN150

32~480 (liquid)

300~3000 (gas)

200

DN200

56~800 (liquid)

550~5500 (gas)

code

Function 1

N

No temperature and pressure compensation

Y

Temperature and pressure compensation

code

Output model

F1

4-20mA output (two-wire system)

F2

4-20mA output (three wire system)

F3

RS485 communication interface

code

measured media

J1

liquid

J2

gas

J3

steam

code

Connection method

L1

Flange card installation type

L2

Flange connection type

code

Function 2

E1

Level 1.0

E2

Level 1.5

T1

normal temperature

T2

high temperature

T3

steam

P1

1.6MPa

P2

2.5MPa

P3

4.0MPa

D1

Internal 3.6V power supply

D2

DC24V power supply

B1

stainless steel

B2

carbon steel


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!