Smoke and dust monitoring equipment-Global supplier

6F, Building B, Jiangsu International Technology Transfer Center, No. 8 Xintai Road, Xinwu District, Wuxi

Smoke and dust monitoring equipmentpass throughElectric heating direct extraction probe extracts flue gas, which is then subjected to dust removal and heating（120~180℃), insulation (greater than120At the (℃) stage, the sample gas is guided to the pretreatment system (mainly to remove particulate matterH2O/Corrosive gases, etc. are transported by the sample gas control system to the analyzer for analysis.

Smoke and dust measuring instrumentutilizeSO2In the infrared region7.3μm（7300nm）Continuous measurement of changes in infrared absorption near the smokeSO2Concentration; utilizeNOanswer5.3μmContinuous measurement of changes in infrared absorption near the smokeNOThe concentration.NO2Convert toNOMeasure again. The change in magnetic declination caused by oxygen is converted into a current signal, and the strength of this signal is linearly related to the concentration. High quality manufacturing processes and design ensure precise measurement of the system.
烟尘烟气监测设备

1、 Product Description

The host of this system isSick-MaihakThe smoke and dust monitoring systemPW320The smoke analysis system, pitot tube flow measurement system, and other main detection instruments are all imported equipment with high technical indicators and good reliability. Output unit:mg/m3，ppmThe cabinet is specially designed and manufactured for smoke analysis sites, with dust prevention, ventilation, and heat dissipation functions. The main purpose of the pre-treatment system is dust removal, cooling, drainage, and sampling. The sampling pump is imported from Germany with original packaging. Compressor refrigerators have the characteristics of large refrigeration capacity, fast cooling, and good water output performance.The main purpose of the electrical control system is to improve the automation level of the analysis system, achieving functions such as automatic blowback cleaning of the probe filter element, sampling pipeline, automatic drainage, and over limit alarm.

IISmoke and dust monitoring equipmenterror analysis
In the systemSO2、NO2The accuracy of the analysis is less than1%FS，The system error is less than ±4%，Can provide95%The utilization rate of the monitoring data mentioned above.Can satisfy at least180The requirement of running in the sky without the need for non routine maintenance. In addition to system software and application software, online fault diagnosis and antivirus software are also configured.
Smoke and dust monitoring equipment: http://www.wxdct.cn/c_html_products/2003-539.html