Siemens ultrasonic flowmeterProduct Features: Ten Point, Long Range Liquid Level Measurement
• Dolphin Plus and SmartLinx combined • Backlit LCD display with standard engineering single reading
• Automatic liquid volume conversion for standard or specially shaped cans • Easy to install, with a detachable infrared keyboard for easy programming
It can scan and measure the liquid or slurry level in any one to ten containers of different sizes, shapes, and structures, up to 60m.
This instrument uses ultrasonic technology to measure liquid level, space, distance, volume, or average/liquid level difference. Ultrasonic sensors can be located up to 365 meters away from the level gauge. SITRANS LU 10 uses special sound intelligence software to ensure reliable measurement. The reading is displayed on a backlit LCD screen, and the unit can be the engineering unit selected by the user.
It can be connected to DCS or PLC using Siemens' SmartLinx communication module. Enable remote two-wire communication and input of all parameters. Modules used for general industrial fieldbus can be installed at the factory or added as needed in the future. No external gateway is required, thus reducing hardware and cable costs.
• Main applications: chemical storage tanks, liquid storage tanks, various container slurries, slurries, tank areas, etc.
Siemens ultrasonic flowmeterTechnical specifications
Operation mode
Measurement principle: Ultrasonic liquid level measurement
The measurement range allows for 0.3~60 meters
The number of measurement points can reach 10
Output signal
Echomax series ultrasonic transducer, ST-H ultrasonic sensor
Relay • SITRANS LU SAM module (optional)
20 alarm/control relays
C-type, SPDT type relay, rated capacity
For 5A, 250 V AC, no inductance
MA output SITRANS LU A0 module (optional): 0/4~20 mA, optically isolated
Load 750 Ω, isolated,
0.1% of the resolution range
Accuracy
Measurement error 0.25% range or 6mm, take the larger value
Resolution 0.1% range or 2 mm, whichever is greater
Temperature compensation -50~150 ° C
• Built in temperature sensor
External TS-3 temperature sensor (expandable with 10 inputs, optional TIB-9 card)
• Program to set a fixed temperature