Japanese imported Sanyo Sanyo clutch gear hub punching cold forming equipment

Sanyo Sanyo clutch gear hub punching cold forming machine imported from Japan

-Sanyo Sanyo clutch hub socket forming equipment imported from Japan

-Sanyo Sanyo clutch drum cutting edge forming equipment imported from Japan

-Sanyo Sanyo clutch hub slotting forming equipment imported from Japan

-Sanyo Sanyo clutch drum multi station forming equipment imported from Japan

brief introduction

The Sanyo Sanyo punching and forming equipment imported from Japan is used for punching oil holes in clutch gear hubs, forming snap spring grooves, and precision cutting end faces, achieving high-speed and high-precision multi station and multi process simultaneous processing.

In addition, fully automated unmanned driving can be achieved through additional transportation equipment and automatic workpiece positioning devices.

According to customer requirements, the Sanyo Sanyo clutch gear hub punching cold forming equipment imported from Japan can achieve free switching between punching from inside to outside and punching from outside to inside.

Example of workpiece

Japanese imported Sanyo Sanyo clutch gear hub punching and cutting double station cold forming equipment 4MP-2H

Japanese imported Sanyo Sanyo clutch hub punching and trimming dual station cold forming machine 4MP-2H

specifications

Cycle time: 1 hole mold opening time within 0.35 seconds (including indexing time)

NC device FANUC POER-MATE-iH

-Used for workpiece rotation indexing

-Fixture (workpiece) for up and down movement (special attachment)

Drive source air pressure and oil pressure

-Oil pressure max 140kg/cm ³

-Air pressure max 140kg/cm ³

special accessories

-Edge detection device after opening - automatic handling device

-Automatic positioning device - chip removal device

-Screw type punching machine&mold - Trimming punching machine&mold

-NC device with up and down positioning - screw type automatic replacement device

purpose

The function of this machine is to perform high-speed and short-term trimming and edge cutting (mirror cutting) on the end face of the clutch gear hub, as well as screw drilling (oil hole drilling).

In addition, by installing handling devices and automatic positioning devices, fully automated unmanned operation can be achieved.

characteristic

-No need to worry about the second rough surface of drilling processing

-Processing through punching machines and molds extends tool life and simplifies tool management.

-The chips are discharged in a solid state, making them easy to handle.

-No need to configure cutting oil device, which is beneficial for improving the factory environment

-The up and down movement of each component and fixture is controlled by servo, and the hole position is adjusted. Replacing parts only requires program control, which is very simple.

-The difference in oil hole diameter can be adjusted through an automatic screw replacement device, without the need to replace the clamp head.

Japanese imported Sanyo Sanyo clutch hub punching, cutting, slotting 3-station cold forming equipment 4MP-3H

Japanese imported Sanyo Sanyo clutch hub punching, cutting, slotting 3-station cold forming machine 4MP-3H

specifications

Cycle time: 1 hole mold opening time within 0.35 seconds (including indexing time)

NC device FANUC POER-MATE-iH

-Used for workpiece rotation indexing

-Driven by pressure slider

-Replacing the pressure slider for use

-Fixture (workpiece) for up and down movement (special attachment)

Drive source air pressure and oil pressure

Oil pressure 3.5MPa

Air pressure 0.35MPa

special accessories

-Edge detection device after opening - automatic handling device

-Automatic positioning device - chip removal device

-Screw type punching machine&mold - Trimming punching machine&mold

purpose

The function of this machine is to perform high-speed and short-term trimming and edge cutting (mirror cutting) on the end face of the clutch gear hub, screw drilling (oil hole drilling), and spring groove forming processing.

Replace the previous hydraulic driven machining with servo motor drive to achieve ultra-high speed.

By combining the convex wheel handling device and the blocking device, high-speed fully automatic unmanned operation can be achieved.

characteristic

-No need to worry about the second rough surface of drilling processing

-Processing through punching machines and molds extends tool life and simplifies tool management.

-The chips are discharged in a solid state, making them easy to handle.

-No need to configure cutting oil device, which is beneficial for improving the factory environment

-The up and down movement of each component and fixture is controlled by servo, and the hole position is adjusted. Replacing parts only requires program control, which is very simple.

-The difference in oil hole diameter can be adjusted through an automatic screw replacement device, without the need to replace the clamp head.

Japanese imported Sanyo Sanyo clutch hub punching and trimming 4-station cold forming equipment 4MP-4H

Japanese imported Sanyo Sanyo clutch hub punching and trimming 4-station cold forming machine 4MP-4H