Sanfeng roundness and cylindricity tester

RA-10 roundness measuring instrument

Portable roundness measuring instrument, with excellent cost-effectiveness, full measurement capability, easy to learn and use.

Technical Parameter

rotary table

Repetitive accuracy: (0.04+6H/10000)μm

HTo measure height(mm)

Rotational speed: 6rpm

Effective diameter of workbench: ø150mm

Maximum measured diameter: ø100mm

Maximum workpiece diameter: ø320mm

Maximum workpiece weight: 10kg

vertical axis(Zaxle)

Vertical movement: 117mm

Maximum detection height:Rotating worktable152mm

Maximum detection depth: 100mm (Minimum inner diameter: ø30mm)

horizontal arm(Xaxle)

Horizontal movement: 75mm (Including workbench rotation center25mmThe outstanding quantity)

Probe and probe

Measurement range: ±1000μm

Force measurement: 70 - 100mN

Standard side head: 12AAB681Hard alloy ballsø1.6mm

Measurement direction:bidirectional

Adjustment of probe angle: ±45° (With scale)

data analyzer:

Processor:built-in

Data analysis items:

Roundness,Coaxiality,concentricity,Flatness,Radial circular runout

Reference circle for roundness evaluation:

　　LSC, MZC, MIC, MCC

Recorder:

Built in line thermal printer(External printer: options)

Recorded magnification:

　　X5 - X200,000 (15level)

Reduction of roughness components:

Low pass filter,band-pass filter

Filter type:

　　2CR-75%, 2CR-50%, 2CR-75% (phasing), 2CR-50%　　

　　(phasing)Gaussian filter, filter off

Cut off value:

　　15upr, 50upr, 150upr, 500upr, 15-150upr, 15-500upr,　　

　　50-500upr

Number of measurement segments

　　1 to5 paragraph:roundness,Coaxiality,Flatness

　　1 to3 paragraph:Radial circular runout

　　2 paragraph:concentricity

air supply

Air pressure: 390kPa

Gas consumption: 30L/min.

power supply: 100V AC – 240V AC, 50/60Hz

size(W x D x H): 450 x 360 x 486mm

weight: 26kg

RA-120 / 120PRoundness cylinderlinear measureinstrument

Roundtest RA-120 / 120PPocket sized, moderately priced, easy to use, suitable for geometric measurement of workpieces in workshop environments.

Technical Parameter

rotary table

Repetitive accuracy: (0.04+6H/10000)μm HTo measure height(mm)

Rotational speed: 6rpm

Effective diameter of workbench: ø150mm

Maximum adjustment amplitude: ±3mm

Maximum horizontal adjustment amplitude: ±1°

Maximum measured diameter: ø280mm

Maximum workpiece diameter: ø440mm

Maximum workpiece weight: 25kg

vertical axis(Zaxle)

Vertical movement: 280mm

Give it in: 30mm/rev (Coarse thread), 1mm/rev (fine thread)

Maximum detection height:Rotating worktable280mm

Maximum detection depth: 100mm (Minimum inner diameter: 30mm)

horizontal arm(Xaxle)

Horizontal movement: 165mm (Including workbench rotation center

25mmThe outstanding quantity)

Probe and probe

Measurement range: ±1000μm

Force measurement: 7 - 10mN

Standard side head: 12AAB681Hard alloy ballsø1.6mm

Measurement direction:bidirectional

Adjustment of probe angle: ±45° (With scale)

data analyzer:

Processor:built-in(Equipped withRoundpak-100ofPC)*

Number of data collection points:at most1,800Point/Turn

Data analysis items:

Roundness, coaxiality, concentricity, flatness, radial circumferential runout

Axial circular runout,Verticality to axis, verticality to plane

Thickness deviation, parallelism

Reference circle for roundness evaluation:

　　LSC, MZC, MIC, MCC

Recorder:

Built in line thermal printer(External printer: options)*

Recorded magnification:

　　X5 - X200,000, Automatic(X1 - X500,000)*

Reduction of roughness components:

Low pass filter,band-pass filter

Filter type:

2CR-75%, 2CR-50%, 2CR-75% (phasing), 2CR-50%

Phase correction, Gaussian filter, filter cutoff value:

　　15upr, 50upr, 150upr, 500upr, 15-150upr, 15-500upr,　　

　　50-500upr,Manual*

Number of measurement segments

at most5 paragraph(100paragraph)* *RA-120

RA-1400 / RA-1500 Roundness cylinderlinear measureinstrument

RA-1400 / RA-1500The roundness meter is equipped with automatic measurement, arc measurement, and digital adjustment workbench(D.A.T.)The roundness measurement system with cutting-edge technology can easily and quickly adjust the center and level of the workpiece.

Technical Parameter

rotary table

Repetitive accuracy(radial) : (0.02+6H/10000)μm

Repetitive accuracy(axial) : (0.02+6R/10000)μm HTo measure height(mm), RTo measure the radius(mm)

Rotational speed: 4, 6, 10rpm

Effective diameter of workbench: ø150mm

Maximum adjustment amplitude: ±3mm (haveD.A.T.function)

Maximum horizontal adjustment amplitude: ±1° (haveD.A.T.function)

Maximum measured diameter: ø100mm

Maximum workpiece diameter: ø400mm*

Maximum workpiece weight: 10kg

vertical axis(Zaxle)

Vertical movement: 150mm

Straightness(narrow range) : 0.15μm / 50mm

Straightness(full range) : 0.3μm / 150mm

Parallelism with the turntable axis: 0.3μm / 150mm

Positioning speed:Using the joystick, maximum15mm/s (It can also be manually fed)

Measuring speed: 0.5, 1, 2, 5mm/s

Maximum detection height: 150mm (outside diameter), 150mm (inside diameter)

Maximum detection depth: 90mm

horizontal arm(Xaxle)

Horizontal movement: 75mm (Including the protrusion of the rotation center of the rotating workbench25mm)

Positioning speed:Using the joystick, maximum8mm/s(Can be manually fed in)

Probe and probe

Measurement range: ±400μm

Force measurement: 7 - 10mN

Standard side head: 12AAB681Hard alloy ballsø1.6mm

Measurement direction:bidirectional

Adjustment of probe angle: ±45° (With scale)

data analysis system

Analysis software: Roundpak

Filter type:

　　2CRPC-75%, 2CRPC-50%, 2CR-75% (phasing),　　　

　　2CR-50% (phasing)Gaussian filter, filter off

Cut off value:

　　15upr, 50upr, 150upr, 500upr, 1500upr, 15-150upr,15-500upr,

　　15-1500upr, 50-500upr, 50-1500upr, 150-1500upr,Manual

Reference circle for roundness evaluation:

　　LSC, MZC, MIC, MCC

air supply

Air pressure: 390kPa (4kgf/cm2)

Gas consumption: 30L/min.

power supply: 100V AC – 240V AC, 50/60Hz

size(W x D x H): 635 x 430 x 620mm

weight: 95kg

* If using a measuring needle clamp(12AAB597)The measurement range can be extended toø70mmtoø220mm.

If it is necessary to rotate less than or equal to the center of rotation of the workbench20 mmSmall distance from the workbench

Equal to or equal to20 mmFor radial measurement, the accessory table option needs to be used(356038).

RA-2100AS / DS / AH / DHRoundness cylindricity meter

RA-2100Provide high-precision, high-speed, and high-performance roundness measurement. Fully automatic or with digital adjustment table for workpieces（DAT）Artificial adjustment of heart and level.

Technical Parameter

rotary table

Repetitive accuracy(radial) : (0.02+3.8H/10000)μm

Repetitive accuracy(axial) : (0.02+3.8X/10000)μm HTo measure height(mm), RTo measure the radius(mm)

Rotational speed: 2, 4, 6, 10rpm

Effective diameter of workbench: ø235mm (ø200mm: DS, DHtype)

Maximum adjustment amplitude: ±3mm (±5mm: DS, DHtype)

Maximum horizontal adjustment amplitude: ±1°

Maximum measured diameter: ø300mm

Maximum workpiece diameter: ø580mm

Maximum workpiece weight: 30kg

vertical axis(Zaxle)

Vertical movement: 300mm (500mm: AH, DHtype)

Straightness(λc2.5): 0.12μm / 100mm, 0.18μm / 300mm* (*0.3μm / 500mm: AH, DHtype)

Parallelism with the turntable axis: 0.7μm / 300mm (1.2μm / 500mm: AH, DHtype)

Positioning speed:maximum35mm/s

Measuring speed: 0.5, 1, 2, 5mm/s

Maximum detection height: 300mm (outside diameter), 300mm (inside diameter) [500mm: AH, DHtype]

Maximum detection depth: 100mm

horizontal arm(Xaxle)

Horizontal movement: 175mm (Including the protrusion of the rotation center of the rotating workbench25mm)

Straightness(λc2.5): 0.7μm / 150mm

Horizontal movement: 1.0μm / 150mm

Positioning speed:Using the joystick, maximum20mm/s

Measuring speed: 0.5, 1, 5mm/s

Probe and probe

Measurement range: ±400μm (±5mmTracking Range)

Force measurement: 7 - 10mN (5level)

Standard side head: 12AAB681Hard alloy ballsø1.6mm

Measurement direction:bidirectional

Adjustment of probe angle: ±45° (With scale)

data analysis system

Analysis software: ROUNDPAK

Filter type:

　　2CRPC-75%, 2CRPC-50%, 2CR-75% (phasing),　　　

　　2CR-50% (phasing)Gaussian filter, filter off

Cut off value:

　　15upr, 50upr, 150upr, 500upr, 1500upr, 15-150upr, 15-500upr,

　　15-1500upr, 50-500upr, 50-1500upr, 150-1500upr,Manual

Reference circle for roundness evaluation:

　　LSC, MZC, MIC, MCC

air supply

Air pressure: 390kPa (4kgf/cm2)

Gas consumption: 30L/min.

power supply: 100V AC – 240V AC, 50/60Hz

size(W x D x H): 667 x 475 x 900mm (667 x 475 x 1100mm: AH, DHtype)

weight: 180kg (200kg: AH, DHtype)

RA-H5100AS / AHRoundness cylindricity meter

RA-H5100AS / AHThe roughness/cylindricity measuring instrument not only has high accuracy, but also has good operability and strong analytical ability.

Improved measurement function, capable of tracking measurement, automatic inner/outer diameter measurement, and circumferential and axial surface roughness measurement.

Technical Parameter

rotary table

Repetitive accuracy(radial): (0.02+4H/10000)μm

Repetitive accuracy(axial): (0.02+6X/10000)μm HTo measure height(mm),XDistance from the axis of the rotating worktable(mm)

Rotational speed: 2, 4, 6, 10rpm (20rpm:Automatic heart adjustment)

Effective diameter of workbench: ø300mm

Maximum adjustment amplitude: ±5mm

Maximum horizontal adjustment amplitude: ±1°

Maximum measured diameter: ø400mm

Maximum workpiece diameter: ø680mm

Maximum workpiece weight: 80kg (65kg:Automatic heart adjustment)

vertical axis(Zaxle)

Vertical movement: 350mm (550mm: AHtype)

Straightness(λc2.5): 0.05μm / 100mm, 0.14μm / 350mm* (*0.2μm / 550mm: AHtype)

Parallelism with the axis of rotation: 0.2μm / 350mm (0.32μm / 550mm: AHtype)

Positioning speed:maximum60mm/s

Measuring speed: 0.5, 1, 2, 5mm/s

Maximum detection height: 350mm (outside diameter), 350mm (inside diameter) [550mm (Outer diameter/inner diameter): AHtype)

Maximum detection depth: 100mm

horizontal arm(Xaxle)

Horizontal movement: 225mm

Straightness(λc2.5): 0.4μm / 200mm

Horizontal movement: 0.5μm / 200mm

Positioning speed:maximum50mm/s

Measuring speed: 0.5, 1, 5mm/s

Probe and probe

Measurement range: ±400μm (±5mmTracking Range)

Force measurement: 7 - 10mN (5level)

Standard side head: 12AAB681Hard alloy ballsø1.6mm

Measurement direction:bidirectional

Adjustment of probe angle: ±45° (With scale)

data analysis system

Analysis software: ROUNDPAK

Filter type:

　　2CRPC-75%, 2CRPC-50%, 2CR-75% (phasing),　　　

　　2CR-50% (phasing)Gaussian filter, filter off

Cut off value:

　　15upr, 50upr, 150upr, 500upr, 1500upr,

　　15-150upr, 15-500upr, 15-1500upr, 50-500upr, 50-1500upr,

　　150-1500upr,Manual

Reference circle for roundness evaluation:

　　LSC, MZC, MIC, MCC

air supply

Air pressure: 390kPa (4kgf/cm2)

Gas consumption: 45L/min.

power supply: 100V AC – 240V AC, 50/60Hz

size(W x D x H): 1260 x 710 x 1700mm (1260 x 710 x 1900mm: AHtype)

weight: 650kg (670kg: AHtype)