VIP member
SS9230 galvanometer
Compared with the S-9 series products, the SS9230 scanning galvanometer has higher speed, higher torque, and lower drift parameters. SS9230 supports 1
Product details
Laser marking
cutting
Laser impedance tuning
scientific research
|
model |
SS9230 |
|
Input the diameter of the light spot( mm) |
15,20 |
|
Effective scanning angle（3） |
±12.5° |
|
Small signal step response time（1）（ms） |
0.4 |
|
Tracking error（ms） |
0.22 |
|
Moment of inertia, g*cm2 ,±10% |
1.84 |
|
Torque constant dyne·cm/amp,±10% |
1.9*105 |
|
Maximum average operating current(A/Single axis) |
4 |
|
peak current(A) |
20 |
|
Zero drift(μRad./℃) |
<15 |
|
Proportional drift( ppm/℃) |
<50 |
|
Linearity（2） |
≥99.90% |
|
Repetitive accuracy（μRad.） |
<8 |
|
Long term continuous work drift,8More than hours( mrad.) |
<0.5 |
|
Weight (excluding cables)（g） |
208 |
|
Working environment temperature |
25℃±10℃ |
|
-All angles are mechanical angles. |
|
|
-All parameters are for power on1Measured in minutes. |
|
|
(1)（1）The minimum load that this model of motor can carryYAxial lens, responsive to full amplitude1%； |
|
|
(2)（2）Refers to within ±20Linearity within the optical angle range of degrees; |
|
|
（3）SS****All series of mirrors support ±20Mechanical scanning angle, please contact Century Sunny for details. |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-