1. Oil free vacuum air pump paper suction system is adopted for the paper feeder's paper receiving head, which can adjust the position of the head during operation. Double head paper suction roller device
2. The powder remover removes the residual powder during printing. The vacuuming effect can increase the flatness and smoothness of the paper surface after polishing. Wet water powder removal is adopted, equipped with dual scrapers (automatic adjustment of cylinder tension), three roller powder removal (pressure roller, rubber roller, water passing roller), and universal bottom oil head.
3. Apply base oil to fill the capillary tube on the paper surface. Increase the adhesion between UV coating and ink. Reduce the penetration of UV coatings to maintain the purity of the paper. Save the consumption of UV oil with three rollers, dual air pressure, and dual scraper. Adopt synchronous operation of powder removal and oil feeding with Schneider frequency converter, automatic shutdown in case of faults, and oil feeding with three-phase oil pump
4. Infrared drying machine - equipped with 15 15KW infrared lamps, independent speed adjustment, (Schneider variable frequency speed regulation). Equipped with PTFE conveyor belt, automatic correction adjustment, and automatic heating and cooling of the shutdown oven. Use a hair dryer to dissipate heat and ensure uniform temperature inside the oven. Low suction high-power fan to remove waste heat.
5. Coating oil head UV coating host, equipped with a highly sensitive air knife system that is suitable for both thick and thin paper polishing. It has a uniform coating effect, making the paper smooth and glossy. Three roll double cylinder double scraper, equipped with a 3KW air compressor (with air storage tank), independently adjustable speed (Schneider variable frequency speed regulation), machine linkage, automatic paper roll shutdown.
6. The UV drying machine emits UV radiation, which can cause UV varnish to harden and wear out, promoting a bright and rapid cooling of the paper surface. Equipped with PTFE conveyor belt, automatic correction adjustment, and automatic heating and cooling of the shutdown oven. Equipped with 3 sets of 8KW transformers, 3 UV transformers, and 3 capacitors. 2 air coolers, 2 sets of suction devices, and 1 set of exhaust
7. The automatic paper feeder belt has low-noise paper feeding and is designed with up and down pressure tracks. Thin paper coating is prone to curling, and a vacuum suction paper leveler device is used.

This machine is a high-tech product that integrates light, machinery, electricity, and gas. It can be used for both thick and thin paper, achieving full process automation, speed, and efficiency. It adopts belt conveyor Variable frequency stepless speed regulation, with a maximum speed of up to 80m/min, each workstation has independent space, and equipment can be combined online according to customer requirements, suitable for large printing enterprises.