The KD4001 oil seal rotation performance testing machine adopts Siemens programmable control system Suitable for testing and researching the sealing performance of various rotary oil seals. The oil seal is installed on a testing machine, and the main shaft rotates at a certain speed. After a certain period of operation, observe whether the oil seal leaks. Two oil seals can be tested at a time, and the test shaft can rotate forward and backward. The structure of this machine is reasonable, the design is novel, the starting performance is good, the speed range is wide, the starting torque is large, the noise is low, and the operation is convenient.

Technical parameters:

1. Spindle speed: High 6000r/min

2. Spindle runout error: less than ± 0.03mm

3. Axis offset adjustment: 0-5mm

4. Tested oil seal shaft hole range: Φ 7~Φ 200mm

5. Motor power: 3kW × 2

6. Pressure range: 0-0.03MPa

7. Temperature range: Room temperature to 120 ℃

8. Power supply: AC380V three-phase five wire system (must have neutral and ground wires) ± 10% 50Hz

9. Dimensions: 1200mm × 800mm × 1500mm

10. Weight: 420kg