(1) The smoke removal effect of Ke Lan Industrial's electrostatic smoke purification equipment can reach 95% smoke removal efficiency.
(2) Low operating costs: Industrial electrostatic smoke purification equipment adopts a honeycomb electric field and horizontal structure with low resistance. Reduced the resistance of the fan and lowered operating costs; The device itself adopts a high-voltage control system and high-voltage power supply, with high conversion efficiency and low power consumption.
(3) Easy maintenance: The components that require regular cleaning are detachable modular combinations, which not only facilitate daily cleaning and maintenance of the equipment, but also facilitate the repair and replacement of these components.
(4) Installation of equipment: The equipment is relatively light and does not require a special foundation. The main equipment has been installed and debugged in the factory. The installation cost is low, the time is short, and it is easy to achieve the design effect.
(5) Small footprint: The power supply and equipment are located together, eliminating the need for a separate power control room and saving factory space.
(6) Safety: The equipment is equipped with fire nets, fire dampers, temperature detection systems, and fire extinguishing systems to ensure safe and stable operation of the equipment.
(7) Upgradeability: The equipment adopts a combination structure with standard flange connections, making it upgradable. Modular purification units can be flexibly combined, and the number of units can be adaptively adjusted according to different purification processing capacities and purification rate requirements.
(8) Continuity of operation: using grouped power supply method; Even if one group of electric fields discharges or malfunctions, other groups can still work normally without affecting the operation of the equipment, ensuring the continuity of equipment operation.
(9) High voltage and low voltage control: High voltage control circuit with chip control, intelligent low voltage control with PLC. It can achieve safe, reliable, and intelligent operation.
(10) Thoughtful design: The high-voltage power supply is carefully designed as a tightly sealed unit made of epoxy resin, using grouped power supply and grouped control, ensuring safe and reliable use.
(11) Airflow direction: Horizontal structure, when installed by users, air ducts, purification equipment, and exhaust fans can be conveniently arranged horizontally for easy layout and reduced wind resistance; At the same time, it is convenient for the purifier to evenly distribute air, thereby improving smoke removal efficiency.
(12) The yin-yang distance adopts a narrow spacing structure: it accommodates a larger yin-yang area per unit volume, with a small volume and good smoke removal effect.


Qingyuan Environmental Protection Rubber Waste Gas Treatment Equipment is an impact type spray absorption tower that can be widely used in the chemical industry. It solves the problems of large absorption liquid consumption and poor atomization effect caused by nozzle blockage in the existing spray device of the absorption tower. It includes the tower body and the partition set inside the tower body. The lower part of the tower body is equipped with a gas inlet, and the lower part of the partition is equipped with a spray reflection bowl. There is a pressurized absorption liquid conveying pipeline with an upward pipe mouth located below the spray reflection bowl on the tower body. Not only is the structure simple and easy to use, but the use effect is also very good, which can achieve the ideal atomization effect of the absorption liquid, increase the contact area between gas and liquid phases, and reduce the amount of absorption liquid used, solving the problem of absorption liquid easily blocking the spray head after long-term use of the existing spray device in the absorption tower.

The desulfurization and purification tower in the rubber factory mainly uses a desulfurization and dust collector to treat the exhaust gas. Firstly, the exhaust gas collected by the gas collection system is transported to the alkali absorption tower. The exhaust gas is input from bottom to top, and the alkali solution is sprayed from top to bottom to spray the exhaust gas. After being treated by the absorption tower, the gas passes through a layer of water curtain dust removal and is input into the combustion tower. This process removes some acidic gases and dust contained in the exhaust gas. The exhaust gas still enters the combustion tower from bottom to top. After combustion in the combustion tower, the organic matter contained in the exhaust gas is removed. Then, it goes through a layer of water curtain dust removal process to remove the dust generated by combustion from the gas. The carbon dioxide and water after combustion can be discharged into the atmosphere.
Characteristics of rubber exhaust gas treatment equipment
1. Adopting segmented assembly, it has the characteristics of small footprint, convenient transportation, and installation.
2. The use of domestic composite materials and fiberglass resin has increased its wear resistance and durability, greatly extending its service life.