Features of the Unit
Advanced energy-saving technology enables the unit to have high operating efficiency and superior partial load performance.
Reliable design
High standard design, such as high pressure compressor design, high standard pressure vessel design, safety valve design, preventive protection design, etc;
SRMTEC compressors are designed and manufactured in full accordance with European industrial product standards and GB/T19410, ensuring stable, reliable, and continuous operation around the clock, with a design pressure of up to 6.3 MPa.
Wide applicable temperature range
The RB series open screw water source heat pump unit has a wide applicable temperature range:
High temperature application: Hot water outlet temperature ≥ 85 ℃;
Medium temperature application: 55 ℃ ≤ hot water outlet temperature ＜ 85 ℃;
Low temperature application: 45 ℃ ≤ hot water outlet temperature ＜ 55 ℃.
Special designs can also be made according to user needs.
Highly integrated design
Optimized structural design, highly integrated unit, small footprint, convenient transportation and installation, and short engineering installation cycle.
Oil separation system
Adopting a four stage oil separation system, the oil separation efficiency reaches 3-5ppm through impact separation, gravity separation, packing separation, and efficient molecular screening, effectively reducing the lubricating oil entering the refrigeration system and improving the system's operating efficiency.
heat exchanger
Optimized heat transfer design ensures the heat transfer of the heat exchanger and improves the operational efficiency of the unit;
High dirt coefficient design, capable of long-term operation without cleaning.
Removable filter
In order to ensure the cleanliness of the system, the unit is equipped with a large capacity oil filter and a suction filter to filter out foreign objects that may be generated during the installation and operation of the refrigeration system, ensuring the stable operation of the unit. The filter is easy to use and maintain, and can be disassembled and cleaned.
Anti backflow design
In order to prevent the compressor from reversing when the unit is shut down, check valves are installed at the exhaust and suction ends of the unit. The check valve at the exhaust end is installed at the exhaust port of the oil separator, which can also prevent the refrigerant liquid in the condenser from returning to the oil separator after shutdown.
Stable product quality
Swedish SRM century old technology and energy efficiency;
The unit undergoes full performance testing before leaving the factory to ensure product stability.
