Detailed introduction of the Jin Ding testing machine

Jack testing machine

The WAQ-10000KN jack calibration device is designed and manufactured in accordance with JJG621-2011 "Hydraulic Jack Calibration Regulations". Mainly used for testing various specifications and types of jacks such as electric hydraulic, through type, large tonnage, large stroke, standard type, non-standard special type, etc, zuiThe maximum bearing capacity is not more than 10000kN. It is an ideal equipment for measuring, testing, manufacturing enterprises, construction units such as highways, buildings, railways, bridges, as well as supervision companies and quality inspection departments to test jacks.

This device mainly consists of a movable crossbeam, screw, worktable, mobile cart, remote control box, etc.

Product Features:

1. Mobile upper crossbeam and workbench: Made of high-strength cast steel, mechanically processed to ensure parallelism, overall rigidity, and long-term stability.

2. Lead screw: 45 # carbon steel, rough machining, quenching and tempering treatment, and then finish machining.

3. The motor drives the crossbeam to move up and down, used to adjust the size of the test space to meet the testing requirements of different specifications and sizes of jacks.

4. Suspended control system: with jog and linkage functions; It can be remotely controlled and fine adjusted; Protecting both sensors and personnel safety; Convenient for operators and extremely safe.

5. Mobile frame system: used for moving in and out of jacks during inspection, using high-strength guide rails, smooth, agile, time-saving and labor-saving.

6. Sensor stabilization system: The stacked structural design facilitates the placement of multiple sensors of different specifications, outer diameters, and heights.

Product Parameters:

1、zuiLarge bearing capacity:10000KN

2、Column span (length x width)1000x1000mm (customized according to customer's specific requirements)

3、Adjustable effective test space: 300-1000mm

4、Adjustment method for experimental space:Motor driven, adjust the horizontal beam by moving it up and down

5、Beam movement speed: ≤110 mm/min

6、Tested jack specifications: ≤1000T

7、Parallelism of upper and lower pressure plates: 0.5/1000

8Jack calibration line:￠ 600mm, ￠ 500mm, ￠ 400mm

9Machine power: 2.2kw

10Working Voltage:Three phase 380V ± 10%

11Dimensions approximately (length, width, height): 1460x1460x2350mm

12Machine weight (approximately): 20t

Zhongyan Testing Machine provides laboratory equipment such as pressure testing machines, impact testing machines, bending testing machines, spring testing machines, fatigue testing machines, friction and wear testing machines all year round. It can also be customized or provided with drawings according to customer requirements. Welcome to consult and purchase.