The diced meat machine is suitable for large factories, mines, universities, government canteens, central kitchens, fast food companies, food factories, fresh supermarkets, meat product factories, semi-finished product processing and distribution places. The whole machine is designed by GermanyMade of 304 stainless steel, it can accurately cut into shapes such as diced, shredded, and shredded meat. It is an important equipment in the production process of meat products. It can cut the main raw materials such as meat chunks, minced meat, and fat into the diced meat that users need. The size and style of the diced meat are determined by the cutting tool switch, which has high work efficiency, large output, easy maintenance, simple tool disassembly and cleaning, and convenient cleaning. It can meet the production needs of a large number of users.
Structural composition
This machine consists of a stainless steel matte sandblasting frame, stainless steel cutting tools, stainless steel guide slots, imported original components and motors, eccentric shaft components, reducers, hydraulic systems, 3D cutting systems, etc.
Working principle
The meat cutting machine has two main movements: feeding movement and cutting movement. The feeding movement uses a push rod to push the raw materials in the cutting groove forward towards the blade grid area, while the cutting movement cuts the raw materials into diced meat. The cutting thickness adjustment button can adjust the speed of the push rod to meet the needs of different cutting thicknesses.
product name | productmodel | External dimensions |
![]() |
Meat cutting machine |
HYTW-350 HYTW-550 |
1480*800*1000mm 1950*1000*1120mm |
|
production capacity | power | Dimension | |
500-600kg/h 700-900kg/h |
3kw/380v 3.7kw/380v |
84*84*350mm 120*120*550mm |
|
Machine weight | |||
500kg 700kg |
|
|
install
1. After unpacking, use a forklift to transport the machine to the work location.
2. Check if the power wiring is correct.
3. Adjust the adjustment feet below the machine to ensure smooth positioning.
4. Check if the appearance has been damaged due to transportation.
5. The installation sequence of cutting tools is to first install the knife grid (with hooks), then install the knife grid, and finally install the cutting blade.
Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.
Operation usage
1. Place the machine steadily and ensure that it does not shake.
2. Check whether the screws in various parts of the machine are loose or missing.
3. Check if the blade grid and cutter are tightened, adjust the screws on the cutting plate,The blade surface is perfectly aligned with the horizontal blade grid surface, and then close the front door
4. Connect the power supply and select the pre pressure and cutting speed for the action state level.
5. Load the meat into the filling groove and press it tightly. Close the sliding door of the filling groove, and the piston will Push the meat forward and press it tightly, and the machine starts cutting. Pistons make meatThe material is pushed to the forefront and the cutting blade stops moving, the piston returns, and the piston returns toBackend, all actions completed.
6. Open the sliding door of the packing groove.
7. After the machine completes its work, turn off the power and clean the machine.
1. The adjustment button does not work when adjusting the cutting thickness
Check if the button is loose, and if so, tighten the knob.
2. There is friction between the large blade and the blade grid
The tool is not properly installed or the three screws on the tool holder are not tightenedInstall and adjust the three screws on the knife holder.
3. Is the machine noisy and the spindle shaking?
◎ Bearing wear, replace the bearing.
4. The machine doesn't move, can't the push rod reset?
Check if the power supply, contact switches, transformers, and solenoid valves are working properlyThe order must not be reversed.
Check if the hydraulic pressure is normal and if the liquid level filter is clean.
Check if the thickness regulating valve is adjusted properly and if there is any damage.
Clean the solenoid valve.