One,Large scale drop testing machine product height drop testing equipmentProduct Usage:

Large scale drop testing machine product height drop testing equipmentproductDamage caused by falling packaging and evaluation of impact resistance during transportation and handling

2、 Introduction Editor
The single wing drop testing machine can perform free drop tests on the surface, corners, and edges of packaging. It is equipped with a digital height display instrument and uses a decoder for height tracking, which can accurately provide the product's drop height and avoid any deviation from the preset drop height
The difference should not exceed 2% or 10mm. This machine adopts a single arm double column structure, with electric reset, electric drop and electric lifting devices: easy to use; *The hydraulic buffering device greatly improves the service life, stability, and safety of the machine
Fully equipped with a single arm setup, it is convenient to place products, and the angle error between the impact surface and the bottom plate plane is less than or equal to 5 °.
3、 Principle Editor
The drop testing machine simulates the situation of different edges, corners, and surfaces falling to the ground at different heights after product packaging, in order to understand the damage situation of the product and evaluate the drop height that the product packaging components can withstand during the drop
Impact resistance strength. So as to improve and perfect the packaging design based on the actual situation of the product and within the standard range. This testing machine is designed to test various products that have been packaged and transported during transportation or handling, and may be damaged due to product degradation
In order to prevent internal damage and eliminate pests in advance, this machine can be used to conduct tests in order to come up with the best solution, so as to minimize losses during transportation and evaluate the impact resistance of electronic components when they are dropped during transportation
strength; A reliable equipment that can test the diamond, corner, and surface of packaging containers.

4、 Main technical parameters:
1. Drop height mm: adjustable from 300-1500
2. Test piece weight kg: 0-60kg;
3. Bottom plate thickness: 10mm (solid iron plate)
4. Test piece large size mm: 800 x 800 x 1600
5. Impact panel size mm: assembled 1700 x 1200=1 piece
1000 * 300=2 pieces
6. Arm size mm: 160 * 250 * 10
7. Drop height error:&plsmn; 10mm
8. Test bench dimensions mm: approximately 1700 x 1800 x 2315
9. Net weight kg: approximately 300kg
10. Test method: surface, corner, edge * drop
11. Transmission mode: electric transmission
12. Drop height error: 1%
13. Parallel error of impact panel: ≤ 1 degree
14. Error between the falling surface and the horizontal angle during the falling process: ≤ 1 degree
15. Power supply: 380V1 (or 220V), power supply: AC380V 50HZ
16. Power: 1.85KWA
17. Test method: surface, edge, corner * drop
18. Height display; LED instrument digital display