PRODUCT FEATURES:Product features:

LXBX series ultra-low temperature separator machine is a

high-tech product which was independently designed and

developed by Lixang Refrigeration Equipment Co., Ltd.

LXBXThe series ultra-low temperature separator is a high-tech product independently designed and developed by Lixiang Refrigeration Equipment Co., Ltd.

It is very suitable for various sizes of mobile phones' LCD repair, recycling, refurbishment, rework, etc.

It is very suitable for various specifications of mobile phonesLCDScreen repair, recycling, refurbishment, rework, etc”.

The lowest temperature of the machine can reach up to-180℃without using liquid Nitrogen as refrigerant.

The minimum temperature in the working area of the machine can reach without using liquid nitrogen as a refrigerant-180℃.

It can easily separate out glass, TP, back-light, OCA, LOCA,bracket from damaged LCD module. No need to change the polarizer film.

It can easily remove glassTPBacklightOCAGlueLOCAGlue, brackets, etc. are separated from the damaged LCD module,No need to replace the polarizer.

High efficiency. No components damage during the LCD module separating process.

Efficient and there is no component damage during the separation process of the LCD module.

It is really a good helper for the LCD reparation industry.

It is indeed a good helper in the LCD display repair industry.

Operation Instructions:Operating instructions

1.) Before using, it will take the machine around 30～40 minutes to

cool to the set working temperature.

Before use, it is necessary to30~40Cool the machine to the set operating temperature in about minutes.

2.) Place the LCD screen on the frozen plate.

Place the LCD screen on the freezer.

3.) Freezing time from 30 seconds to 1 minute depends on different LCD screens.

Freezing time from30Seconds to1The minutes depend on different types of LCD screens.

4.) Take out LCD screen and separate it.

Remove the LCD screen and separate it.

5.) Below is the URL of youtube video link for your reference:

Here is YoukuThe video linkURLFor your reference:

http://i.youku.com/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0

Tips:prompt

1. For serious crushed glass, please stick a tape on glass for safety and good for machine.

For severe broken glass, please apply tape to the glass to ensure safety and benefit the machine.

2. Please make sure the operator wears gloves in case of danger.

Please ensure that the operator wears gloves to prevent danger,

3. It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the back-light water inlet.

After freezing treatment, it is much easier to separate the bracket and other components. Please pay attention to the backlight water outlet.

4. After separating the LCD screen, pay attention to the water treatment and temperature recovery.

After separating the LCD screen, pay attention to water treatment and temperature recovery.

5. When separating the curved screen, the separation risk caused by the temperature difference between 2 sides of the curved surface

LCD screen. Please pay more attention to this point.

When separating the curved screen, the curved surfaceLCDPlease take note of the separation risk caused by the temperature difference on both sides of the screen.

6. After LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

After separating the LCD screen, please place the adhesive on the side of the screen upwards to avoid debris from sticking to the surface of the screen, and let the surface temperature of the screen return to normal.

Product Parameters: