PRODUCT FEATURES:Product features:

At present, there are 3 kinds of methods (molybdenum wire cutting, liquid nitrogen freezing and refrigerator freezing) which are regularly used in LCD screen reworking industry.

There are currently three commonly used methods in the LCD screen repair industry: molybdenum wire cutting method, liquid nitrogen freezing method, and refrigerator freezing method.

The efficiency of the molybdenum wire cutting method is very low and the relevant yield rate of LCD refurbishment is also very low.

There are currently three commonly used methods for LCD screen rework in the industry: molybdenum wire cutting method, liquid nitrogen freezing method, and refrigerator freezing method.

If users adopt liquid Nitrogen to separate the LCD screens, the consumption of liquid Nitrogen is too large and LCD screen explosion phenomenon will occur at any moment. On the other hand, injury hidden danger exists on the liquid Nitrogen during the LCD screen separating process.

If the user uses liquid nitrogen to separate the LCD screen, the consumption of liquid nitrogen will be too high, and liquid nitrogen explosion may occur at any time. On the other hand, there is a risk of damage to liquid nitrogen during the separation process of LCD screens.

Compared with the above mentioned 2 methods, LXBX series ultra low temperature frozen separator machine has many advantages in the LCD screen separation field. Its later use-cost is much lower than liquid Nitrogen, and it is also much more convenient and safer. In view of these advantages, LXBX series ultra low temperature frozen separator machine has been adopted by many LCD manufacturers and LCD maintenance enterprises because of its high yield rate of LCD refurbishment, low use-cost, no danger and other excellent characteristics as follows:

Compared with the above two methods,LXBXThe series of ultra-low temperature cryogenic separators have many advantages in the field of liquid crystal screen separation. Its later use cost is much lower than liquid nitrogen, and it is more convenient and safe. Given these advantages,LXBXThe series of ultra-low temperature cryogenic separators have been adopted by many LCD display manufacturers and maintenance companies due to their excellent characteristics such as high LCD display refurbishment rate, low usage cost, and no harm

1.) Ease of operation,one-button start, high precision intelligent temperature control system,rapidly reach to the preset temperature.

1.)Easy to operate, one click start, high-precision intelligent temperature control system, quickly reaching the preset temperature.

2.) Imported advanced refrigeration compressor and accessories, can run continuously for 24 hours, more stable refrigeration performance.

2.)Adopting advanced imported refrigeration compressors and accessories, capable of continuous operation24Hours, more stable cooling performance.

3.) Equipped with double sealing treatment top opening door and super thick thermal insulation layer box body, excellent thermal insulation performance,effectively reduce the loss of cooling capacity and greatly ensure the working temperature, energy saving, easy to operate.

2.)Equipped with a double-layer sealed top door and an ultra thick insulation layer box, it has excellent insulation performance, effectively reducing the loss of cooling capacity, greatly ensuring working temperature, energy saving, and easy operation.

4.) Safety electricity protection system equipped with ground wire, over heat protection, short circuit protection, over current protection, high & low voltage protection, reverse phase lack protection etc. Greatly ensure users’safety.

4.）Equipped with grounding wire, overheating protection, short circuit protection, overcurrent protection, high and low voltage, reverse, phase loss protection and other safety electrical protection systems, greatly ensuring user safety.

5.) Easy to operate, can provide operation instruction, pictures and videos for users.

5.)Easy to operate, providing users with operation guidance, pictures, and videos.

6.) Compared with heater vacuum separator, ultra-low temperature frozen LCD separator can help you easily solve your headache about bulk volume separating workload and edge screen separating, it can also peel off a lot of OCA, LOCAglue except for SCA glue.

6.)Compared with the heater vacuum separator, ultra-low temperature freezingLCDSeparators can help you easily solve the problems of massive separation workload and edge screen separationBesidesSCABesides glue, it can also peel off a lotOCA、LOCAGlue.

7.) No need to change the polarizer film.

7.)No need to replace polarizing film

8.) Can keep the back-light (be careful, easily damaged), also can take off theback-light.

8.)Can retain backlight(Be careful, it is easy to damage)You can also remove the backlight.

9.) High efficiency. No components damage during the LCD module separating process.

9.)efficient,There was no component damage during the separation process of the LCD module.

Operation Instructions:Operating instructions

1.) Before using, it will take the machine around 30～40 minutes to cool to the set working temperature.

1.)Before use, it takes about30~40About minutesmachineCool down to the set operating temperature.

2.) Place the LCD screen on the frozen plate.

2.)Place the LCD screen on the freezer.

3.) Freezing time from 30 seconds to 1 minute depends on different LCD screens.

3.)Freeze time from30Seconds to1The minutes depend on different LCD screens.

4.) Take out LCD screen and separate it.

4.)Remove the LCD screen and separate it.

5.) Below is the URL of youtube video link for your reference:

5.)Here is YoukuThe video linkURLFor your reference:

http://i.youku.com/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0

Tips:prompt

1.)For serious crushed glass, please stick a tape on glass for safety and good for machine

1.)If there is severe broken glass, please apply tape on the glass to ensure safety and benefit the machine.

2.)Please make sure the operator wears gloves in case of danger.

To prevent danger, please ensure that operators wear gloves.

3.) It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the back-light water inlet.

3.)After freezing treatment, it is easier to separate the bracket and other components. Please pay attention to the backlight inlet.

4.) After separating the LCD screen, pay attention to the water treatment and temperature recovery.

4.)After separating the LCD screen, pay attention to water treatment and temperature recovery.

5.) When separating the curved screen, the separation risk caused by the temperature difference between 2 sides of the curved surface screen. Please pay more attention to this point.

5.)The separation risk caused by the temperature difference on both sides of the curved screen during the separation of the curved screen. Please pay attention to this.

6.) After LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

6.)After separating the LCD display, please place the adhesive sideways to avoid debris sticking to the surface of the adhesive and allow the screen temperature to return to normal.

Product Parameters: