LIQUID GRAB SAMPLER Online Liquid Particle SamplerProduct Introduction:
The LGS liquid sampler provides a reliable pump system and NEMA enclosure for the Lighthouse remote liquid particle counter, helping it connect with operating equipment and equipment monitoring systems.
The design of LGS is suitable for various applications and provides reliable samples, such as component cleaning, wastewater monitoring, and monitoring in various environments.
Connected with advanced pumps, precise pump speed control, precise flow rate control, external control, and low-pressure pump switch. LGS is easy to set up, install, and monitor. The remote liquid particle counter (sold separately) provides real-time particle counting data. All data can be easily transmitted to computers or large monitoring devices
Product features:
External pump control
RS-485 bus output
Easy to use
Intelligent management system interface
Maintain high flow rate (user management)
The same data characteristics as the LWS remote particle counter
Reliable design
Easy download of computer data
Connection between Remote LPCs and LWS Remote Liquid Particle Counter
LIQUID GRAB SAMPLER Online Liquid Particle SamplerTechnical parameters:
Channel range-refer toLWSRemote Liquid Particle Counter Data Sheet
|
0.1-100.0micron
|
velocity of flow |
100Milliliters per minute
|
Wet materials, pumps |
stainless steelPeek PTFE
|
Wet materials, piping |
PTFE |
Wet raw materials, flow meter |
Nitrile RubberPolytetrafluoroethylene, glass, aluminum
|
Pump engine |
dc brushlessmagnetic transmission
|
Pump model |
Gear, PTFE, repeatable flow rate |
LPCline type
|
Built in, standardRJ-45External, reinforced airtight sealRJ-45
|
communication mode |
RS-232 via RJ-45 to PC, RS-485/MODBUS |
Software support
|
LMS Express RT and RT+; LMS and LMS Net |
Liquid connection |
1/4'Cone shaped hole, made of polytetrafluoroethylene
|
External vacuum control
|
Installation of external equipment DC relay, wiring screws and terminals |
casing |
NEMA |
liquid circulates |
Built in pump, operating flow rate control |
power supply |
100-240 VAC, 50-60 Hz |
size |
7.0' (d) x 16.8' (w) x 17.2' (h) [17.8 x 42.7 x 43.7 cm] |
weight |
10Pound(4.5Kgs)Shipment, (none)RLPC)
|
Environmental requirements | |
operate |
50°F to 104°F (10°C to 40°C) / 20% to 95%Relative humidity, no condensation |
storage |
14°F to 122°F (-10°C to 50°C) / Up to 98%Relative humidity, no condensation |
accessory | |
Random attachments |
Power supply, power cord |