Kel-Ym-6SY CNC Dual Spindle Single Power turret Turning and Milling Composite CNC Lathe-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13929480028
Address

Wuzhushan Industrial Zone, Wulan Village, Huangpu Town, Zhongshan City

Contact Now

Kel-Ym-6SY CNC Dual Spindle Single Power turret Turning and Milling Composite CNC Lathe

Contact Supplier

More Products

Product details

Equipment Name: CNC Dual Spindle Single Power Knife Tower Turning and Milling Composite CNC Lathe Equipment model: kel-Ym-6SY

Technical Agreement Explanation for Kel-Ym-6SY Dual Spindle/Single Power Knife Tower Composite Turning and Milling Center
1. Model and specification: kel-Ym-6SY CNC dual spindle single power turret turning milling composite CNC lathe

2. Performance Description of Machine Tool

This machine tool is a dual spindle single power turret CNC composite turning and milling center, equipped with Taiwan's new generation 200TB CNC system. Users can customize according to their needs
Hydraulic feeding device can be optionally selected to achieve continuous automatic processing. This machine tool has the functions of milling, turning, drilling, countersunking, and tapping workpieces in both directions
Surface processing and other functions; Dual spindle synchronous machining allows workpieces to be processed in one go, effectively improving the machining cycle of small and medium-sized parts.

3. Main technical indicators:

project	model	unit	kel-Ym-6SY(Dual spindle single power turret）
Processing capability	number of axles	—	7-axis (X+Z+E+CM+CS+Y+TD)
	Maximum bed rotation diameter	mm	φ780(30.71)
	Maximum machining part diameter	mm	φ300(11.81)
	Maximum processing length	mm	500
main shaft	Spindle nose end	—	Positive: A2-5	Vice-: A2-4
	spindle bore	mm	φ56(2.2)	φ46(2.0)
	Diameter of the inner hole of the spindle rod	mm	φ45(1.7)	φ35(1.4)
	Hydraulic clamp head	rpm	F169(6)	F150(5)
	Maximum spindle speed	rpm	0-6000 (positive)	0-6000 (Deputy)
	Spindle speed	Non-stop variable speed
turret	Knife tower model	SMBR-16-34(VD\|30)
	Knife tower form	—	DTT-80
	Knife tower form (number of knife positions)	PCS	12 Good Knives/DIN5480
	Outer diameter handle	mm	20（0.75）
	Inner diameter handle	mm	Ø32（1.25）
	Milling and sales shaft rotation	rpm	3000
Travel - Sliding Seat (X-axis)&Sliding Seat（Z. XAxis)&Y-axis	X-axis travel	mm	180（7.9）
	Z-axis travel	mm	560（22.5）
	E-axis travel	mm	500（19.69）
	Y-axis travel	mm	±40（1.57）
	X-axis fast forward speed	mm/min	25~30
	Z-axis fast forward speed	mm/min	25~30
	E-axis fast forward speed	mm/min	20~30
	Z-axis fast forward speed	mm/min	25~30
	Cutting feed (X/Y/Z)	mm/min	0.001-500
motor	Spindle motor (continuous)	Kw	5.5（7.5）
	Spindle motor (30 minutes)	Kw	7.5（10）
	Secondary spindle motor (continuous)	Kw	3.7（5.5）
	Auxiliary spindle motor (30 minutes)	Kw	5.5（7.5）
	X-axis	Kw(HP)	1.5（2）
	Z-axis	Kw(HP)	1.5（2）
	E-axis	Kw(HP)	1.5（2）
	Y-axis	Kw(HP)	1.8（2.4）
	TD axis	Kw(HP)	1.8（2.4）
	Hydraulic pump motor	Kw(HP)	1.5（2）
	Cooling pump motor	Kw(HP)	0.75（1）
Hydraulic tailstock	Tail seat shaft diameter	mm	-
	Tail seat travel	mm	-
	Top center taper	—	-
	Top Journey	mm	-
capacity	Cooling water tank capacity	L	100
	Hydraulic oil capacity	L	60
	Oil Capacity	L	2
Size/Weight	Floor Area (LxWxH)	mm x mm	290023002100
Size/Weight	Machine weight (net weight, gross weight)	kg	5480（6030）

Optional accessories: 1. Hydraulic automatic feeding 4M type
2. Automatic alignment angle head 90 degree side milling head

4. Main structure of machine tool
(1) The main components of a machine tool
This machine tool mainly consists of a bed body part, a composite milling column part, a spindle component, a sub spindle part, a CNC part, a hydraulic part, a lubrication part, a cooling part, a protective part, a power turret, etc.
（2) Structural layout
The main body structure, including the base Saddle Spindle head Sliding seat Auxiliary spindle Fully made of Mihana cast iron, and then annealed to eliminate internal stress, ensuring long-term accuracy.
The X/Y/Z/E axis adopts a roller type track, which ensures high stability during heavy cutting.
（3）Basic large-scale structure and characteristics
lThe main large components such as the bed, spindle, auxiliary spindle, and column are all box shaped or approximately box shaped structures, and are equipped with sufficient reinforcement ribs
The board ensures that the entire machine has sufficient strength and rigidity.
（4）Main drive and spindle
The main transmission mechanism is set on the left side, and the auxiliary spindle is placed on the right side and movable.
Both the main and auxiliary shaft transmissions are driven by AC main shaft motors and servo controlled.
●X/Y/Z/EAll shafts are driven by servo motors
The two ends of the ball screw are equipped with imported Japanese CNC machine tool specific screw drive bearings, and the ball screw is pre stretched in both directions to ensure the feed stiffness of the screw.
5. Hydraulic system
The hydraulic system, as an independent device, is mainly used to achieve the clamping of workpieces between the hydraulic spindle and the auxiliary spindle, as well as the clamping and positioning function of the spindle during milling. It has a simple structure, reliable performance, and easy maintenance. High quality hydraulic components are used to ensure the stability and reliability of the hydraulic system performance.
6. Lubrication system
The spindle bearings adopt high-quality lubrication. All moving components such as guide rails and ball screws have a complete dual centralized lubrication system, which can achieve timed and quantitative fully automatic lubrication.
7. Cooling system
Configure the processing cooling system and coolant recovery device to ensure sufficient cooling.
A set of chain type automatic chip removal devices and chip loading carts can be optionally selected to facilitate the maintenance and upkeep of the machine tool.
8. Safety protection
●X/Y/Z/EAdopting a stainless steel telescopic protective cover to ensure the isolation of the work area from the position of the guide rail screw, ensuring the reliability and lifespan of the guide rail and screw operation.
The three-way feed mechanism is equipped with a mechanical safety anti-collision device.
The main motor and feed motor are both equipped with overload and overheating electrical protection functions. The three-way mechanism is equipped with soft limit, hard limit, and limit block control devices, as well as mechanical safety anti-collision devices, ensuring safe and reliable operation of the machine tool.
Configure machine tool work lighting and work warning lights.
All mobile pipelines are equipped with metal or non-metal chain devices for safety protection.
9. Machine tool working environment
Power supply: 380V ± 10%, 50Hz ± 2%, three-phase AC, users must be equipped with AC voltage stabilizer.
● Environmental temperature:+5 ° C~40 ° C. Recommend users to configure environmental temperature control devices.
Relative humidity: 35-90%, no condensation.
10. List of main purchased parts
serial number	name	Manufacturer
1	Numerical Control System	Taiwan's new generation
2	Spindle motor and servo system	Yaskawa, Japan
3	Auxiliary spindle	Taiwan Pusen
4	Four axis drive motor and servo system	Yaskawa, Japan
5	Three way ball screw pair	Taiwan Intime（PMI）
6	spindle bearing	JapanNSK
7	Screw rod bearing	JapanNSK
8	coupling	American capitalMASHAR
9	automatic lubricating pump	Valley lubrication
10	Main contactors and air switches	Schneider, France
11	Roller track	Taiwan Intime（PMI）
11. Accompanying documents
1	operation instructions	1share
2	operating manual	1share
3	programming manual	1share
4	System Maintenance Manual	1share
12. Machine tool acceptance
1) Acceptance criteria:
The geometric accuracy of the machine tool shall be implemented in accordance with national standards. The position accuracy of the machine tool shall comply with the protocol requirements.
2) Acceptance procedure:
After the equipment is installed and debugged on the buyer's site, final acceptance shall be carried out. After the final acceptance is qualified, both parties sign and it becomes effective, entering the warranty period.
13. After sales service
a) Warranty period: From the date of final acceptance, we provide a one-year warranty for the entire machine and an 18 month warranty for the CNC system. During the warranty period, the seller is responsible for free maintenance and replacement of damaged parts of the equipment under normal operating conditions.
b) After the warranty period, Party B shall still provide timely, fast, and preferential services.
14. Machine tool photos

15. The performance characteristics of the main components of the machine tool are described as follows:
(1) High rigidity, precision mechanical structure.

kel-Ym-6SY 高刚性，精密机械结构

The main body structure, including the base Saddle Spindle head Sliding seat Auxiliary spindle Fully made of Mihana cast iron, and then annealed to eliminate internal stress, ensuring long-term accuracy.

45 degree inclined bed structure, providing efficient iron removal and stable support characteristics

High performance servo motors directly drive ball screws, which are pre tensioned.

All shafts use ball screw wire tracks.

(2) The main and auxiliary shaft structures enable the workpiece to be processed in one go.

主軸与副軸结构使工件一次加工完成

(2) Y-axis turret
The positioning of the turret is fast, and the direction can be changed to select any knife.
The radial VDI cutter head can be used for front and rear processing.
Excellent turret structure design, combined with ultra wide slide, ensures optimal structural rigidity and machining accuracy.
The Y-axis adopts ball screw linear track transmission and the motor is directly connected.
Ensure high stability during heavy milling.

(3) Precision spindle
The barrel type spindle structure is extremely convenient for disassembly and maintenance.
The spindle adopts P4 grade precision bearings, which have excellent axial thrust resistance and radial stability. Ensure precision during re cutting.

精密主軸

(4) C-axis and TD axis turret
● Adopting Duplex SMBR radial, VDI， 12 power turret,.
● Cooperate with Yaskawa absolute value motor drive (excluding rotary tool holder and cutting tools).
The analysis resolution can reach 0.001, suitable for precision contour/indexing control. Adopting hydraulic disc locking, providing optimal stability for milling and contour machining.
The turret disk and TD axis are driven by a single motor.

C轴与TD轴刀塔

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content