OneKSKang oscillatorIntroduction:

KSKang oscillatorIt is an ideal tool for laboratories and laboratories in various colleges and universities, environmental protection, health, epidemic prevention, petroleum, metallurgy, chemical, grain and other units, greatly improving the work efficiency of laboratory personnel,KS Corning oscillatorIt can be used for solution analysis in containers such as test tubes, separating funnels, and triangular flasks, solving the problem of movement during the operation of other oscillators without noise. It also has a timing device added, which is convenient for laboratory personnel.

IIKSKang oscillatorTechnical parameters:

1. Oscillation frequency: 0-320 times/minute (stepless speed regulation)
2. Vibration amplitude: 20mm
3. Continuous work: 8 hours
4. Single phase AC power supply: 220V ± 10V 50HZ
5. Timing range: 0-120 minutes
6. Motor power: 60W
7. Working mode: Horizontal reciprocating

IIIKSKang oscillatorusage method:

When using this instrument, first connect the power supply, then place the volumetric flask that needs to oscillate the solution into the spring fixture, cover the mouth with a rubber stopper, turn on the timer, select the time you need to control or turn it to the normally open position, and then turn on the power switch to start working. When working, please choose the oscillation speed that you are satisfied with, and start at a low speed when starting up.

4KSKang oscillatormatters needing attention:

To ensure safety, please connect the ground wire (i.e. three pin plug) when using
When not working, the power should be turned off and disconnected to prevent accidents.
3. The instrument should be kept clean and dry, and it is strictly prohibited to use a metal hammer to strike it.