KFR41 Compact Turbine Flow Meter-Global supplier

1st Floor, Building 2, No. 89 Huguang East Road, Meilian Industrial Park, Minhang District, Shanghai (201108)

Accuracy:	± 0.2% of full range; ± 0.5% of full range; ± 1% of full scale
Repeatability:	± 0.1% of the measured value
Response time:	Maximum 50 milliseconds relative to input change
Stability:	Stability for more than 6 months is ± 0.1% of the measured value
The impact of environmental temperature:	Exceeding the working temperature range is ± 0.25% of the measured value
The impact of installation location:	It is necessary to ensure that the sensor is fully loaded and that there are sufficient straight pipe sections in front and behind, in order to ensure installation without any impact
Start time:	Starting from zero traffic takes 50 milliseconds
Preheating time:	It takes 5 minutes from power on to reaching the rated measurement accuracy
Nominal caliber:	F Internal thread type: DN4... DN80
	M External thread type: DN4... DN65
	C Sanitary clamp type: DN10... DN100
	L flange type: DN4... DN300
Temperature range of the tested fluid:	-40 …120℃，
Sensor body material:	Stainless steel 1.4301 (304), stainless steel 1.4571 (316)
Material of impeller and accessories:	Stainless steel 1.4462 (duplex steel 2205)
Material of impeller and accessories:	Stainless steel 1.4104 (430F)
Voltage resistance level:	PN10 … PN63
Coil impedance:	1600Ω
Environmental temperature range:	-20 … 140° F (-29 to 60 ℃ )
Converter sealing ring:	rubber
Power Supply:	DC 12V... 30V, 1A quick fuse;
Protection level:	IP65
Electrical interface:	DIN standard connector (DIN43650); M12 * 1 aviation connector
Power:	max 0.3 W
Output:	Pulse output (for total quantity), current, voltage
Flange standard:	DIN、ASME 、JIS、 Product application standard
Lubricated bearings:	Optional