VIP member
KD210T electric adjustable water bath nitrogen blowing instrument
KD210T electric adjustable water bath nitrogen blowing instrument
Product details
KD210T Adjustable Water Bath Nitrogen Blower
1、 Product Introduction：
KD210T electricAdjustable water bath nitrogen blowerIt is a high-precision temperature control instrument formed by combining microcomputer processing and PID control. Its working principle is to quickly, continuously, and controllably blow nitrogen gas onto the surface of the heated sample. Based on the evaporation rate and boiling point of the concentrated solvent, the heating temperature is set to achieve rapid concentration of a large number of samples.
KD210T electricThe adjustable water bath nitrogen blowing instrument adopts electric hydraulic lifting technology to control the needle lifting, making the experiment convenient and fast;Using water bath heating, heat transfer is uniform and fast. Blow nitrogen onto the surface of the sample to achieve anaerobic concentration of the liquid sample. The blowing pipes are mutually independent and will not cause cross contamination. The GE gas needle channel on the gas distribution component can be used in combination or independently. The system has high temperature control accuracy, wide temperature control range, temperature numerical control digital display, and convenient temperature calibration. The product has a beautiful and elegant appearance, simple operation, safe and reliable use.
2、 Product features:
1. Adopting hydraulic electric lifting technology, the experiment is convenient and fast
2. The instrument is equipped with 12 sets of gas flow control valves to regulate the gas flow rate
3. Each gas needle stands on its own from other gas needles to avoid cross contamination
4. The air needle is made of 316 stainless steel and added withsprayTeflon coating, corrosion-resistant, acid and alkali resistant
5. Adopting PID digital temperature control technology, high temperature control accuracy
6. Available in multiple specifications of air needles and water bath modules (standard 15mm aperture) for selection
7. Built in temperature over temperature protection device to protect experimental samples
3、 Technical parameters:
model: KD210S
Sample size: 12, 24
Heating method: water bath heating
Temperature range: Room temperature~100 ℃
Temperature control accuracy: ≤ ±1℃
Display accuracy: 0.1 ℃
Temperature uniformity:@ 80℃ ≤±2℃
Timing time: 0~99h 59min
Heating time: ≤ 30min
Lifting method: electric hydraulic lifting
Gas pressure: ≤ 0.05Mpa
Gas flow rate: ≤ 15L/min
Temperature control method: 4-digit LED digital display PID temperature control
Dimensions: 345X210X495 (mm)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-