Osaka Precision Machinery Co., Ltd., JapanGear meshinginstrument

JapanOSAKAGear meshinginstrument

JapanOSKGear meshinginstrument

GTR-4LSGear meshing measuring instrument

The most commonly used gear for small pitch or small gears is the 2-tooth meshing testing machine, which has been widely used in Japan since a long time ago, and is widely used overseas for measuring gears in measuring instruments, clocks, cameras, computers, copiers, audio-visual products, etc. Due to the linear scale of the detection sensor used in the tooth meshing machine, it can also be used for radius measurement. Measure the minimum modulus0.2mm.

GTR-25/GTR-30/GTR-40/GTR-60Gear meshing measuring instrument

Measurement of comprehensive meshing error, meshing error of all pitches, etc. In order to meet various user requirements, it is equipped with accessories such as standard gears, internal gear devices, bevel gear devices, and automatic eccentric devices.

（1）GTR-25Gear meshing measuring instrument

center distance: one hundred and five～250mm

Special center distance:25-170mm

Special center distance:25-170mm

（2）GTR-30Gear meshing measuring instrument

center distance: fifty-eight～300mm

Special center distance:38-170mm

（3）GTR-40Gear meshing measuring instrument

center distance: one hundred and ten～400mm

Special center distance:40-520mm

Special center distance:85-565mm

（4）GTR-60Gear meshing measuring instrument

center distance: one hundred and twenty～600mm

Special center distance:40-520mm

Special center distance:85-565mm

GTR-30k-AGGear meshing measuring instrument(Automatically filter the corresponding numerical counter

Compare the automatic filtering numerical counter with2Gear meshing testing machineGTR-30Connection, as the test results can be converted into digital quantities, at the end of the measurement, the data of the measured value can be represented and the judgment indicator light can be used to indicate whether it exceeds the allowable value. The measurement items include collision damage, eccentricity, and size. The quality of the tested gear can be easily judged by anyone.

center distance: fifty-eight～300mm

Special center distance:38-300mm

GTR-PCGear meshing measuring instrument(Corresponding to microcomputer)

Integrate the microcomputer system with2Gear meshing testing machineGTRThe series meshing instrument can be connected to not only output the previous simulated record graph, but also achieve the separation data of pitch meshing error, various meshing errors, and eccentric componentsJGMAAnalysis of level judgment, etc. This microcomputer system can also correspond to the old meshing testing machine.