Infrared Moisture Meter _ Infrared Moisture Content Tester _ Rapid Moisture Detector Application Fields:

The Jingtai brand JT-K series laboratory specific moisture analyzer is used in industries that require rapid moisture measurement. It can measure any particle, powder, sheet, or non-volatile liquid, such as the pharmaceutical industry, chemical industry, electronics and semiconductor industry, plastic raw materials, rubber, tobacco, tea, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and more. The JT-K series moisture analyzer is an ideal choice for measuring moisture in the production process of enterprises and laboratories.

Working principle of infrared moisture analyzer, infrared moisture content tester, and rapid moisture detector:
Traditional moisture determination generally uses oven drying method, which takes two to three or even three to four hours to test a sample, and also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of oven method for moisture determination cannot meet the fast-paced production needs of enterprises. The Jingtai JT-K series rapid moisture analyzer is a newly developed rapid moisture analyzer by Taizhou Jingtai Instrument Co., Ltd. It uses a high-power drying heater ring halogen lamp to quickly and uniformly heat the sample, and the moisture content of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

The JT-K series halogen rapid moisture analyzer from Jingtai brand applies the principle of oven drying method, and the measurement results have good consistency with the oven method moisture measurement, but the work efficiency is much higher than that of the oven method moisture measurement. By using the Jingtai brand JT-K series rapid moisture analyzer, samples can generally be measured in just a few minutes, which has been favored and praised by a large number of users.

Infrared Moisture Meter, Infrared Moisture Content Tester, Rapid Moisture Detector Technical Parameters:

Moisture content measurement range: 0.01% -99%

Solid content determination range: 99% -0.01%

Larger weight: 110g

Weighing accuracy: 0.005g

Moisture content readability: 0.01%

Heating temperature: 40-200 ℃

Display content: moisture content, solid content, time, temperature, weight

Display mode: LCD screen with backlight source

Weighing sensor: German imported sensor to ensure measurement accuracy

Temperature sensor: High precision PT100 platinum thermistor

Power supply: Voltage 220V ± 10%, Frequency 50HZ ± 1HZ

Weighing tray size: diameter 90mm

Working environment temperature: 5 ℃ -35 ℃ is better

Dimensions: 380mm × 200mm × 180mm

Net weight: 5.8kg

Jingtai brand infrared | halogen rapid moisture analyzer operation steps:

Many customers have inquired about how to operate the JT-K series infrared halogen moisture analyzer and whether the operation is cumbersome.

The JT-K series infrared halogen rapid moisture analyzer from Jingtai brand is a high-tech moisture analyzer with very accurate measurement data. It is extremely easy to use and does not require special training. The operation steps are as follows:

Firstly, evenly place the sample to be tested into the sample tray, then cover it with a heating cover, and finally press the "start" button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen.