Before operating the instrument, please read the instructions carefully and follow the safety operation regulations. Please place this instruction manual in a convenient location for the user to consult. Please ensure that only personnel who have received relevant training can operate the instrument. Please comply with safety regulations, personal safety, and accident prevention regulations. Depending on the type of processing medium, please wear appropriate protective equipment when operating the instrument. Pay attention to the following possible dangers: liquid splashing out of the body, hair, clothing, or jewelry being hooked or entangled.

Before using the instrument and accessories, please check for any damage. Do not use damaged parts, and do not operate the instrument in explosive environments, hazardous substances, or underwater. There may be static electricity between the medium and the dispersing tool of the instrument, which can cause danger. The instrument is also suitable for handheld operation. Please place the instrument bracket on a stable, clean, non slip, dry, and fire-resistant table. Please ensure that the bracket table does not move during operation. Please ensure that the container containing the medium is firmly fixed and the entire system is stable. Fix the mixing container to prevent rotation. Glass containers need to be fixed with fixtures to prevent container rotation. Do not touch the dispersing tool with the glass container during operation. Please pay attention to the operating instructions for dispersing tools and other optional accessories. Only IKA The sentence is: Only approved dispersing tools can be used for this instrument. Install dispersing tools correctly according to the instructions. Do not operate machines without dispersing tools. Disperse tools should be placed inside the container to ensure safetyIKA small disperser T10ofThe dispersing tool fixing knob is securely installed. If necessary, tighten the fixing knob. Before debugging the machine, make sure the instrument is set to normal speed and gradually increase the speed. Otherwise, the instrument will run at the last set speed. If the dispersed medium splashes out of the container due to high speed, reduce the instrument speed.

To prevent the medium from splashing out of the container, please ensure that the dispersing tool is immersed in the medium to be processed by at least 20mm before turning on the instrument. The distance from the dispersing tool to the bottom of the container should not be less than 10mm. If the instrument is unbalanced or produces abnormal noise, please stop working immediately and replace the dispersing tool. If there is still no improvement after replacing the dispersing tool, please provide the fault description of the instrument to your supplier or manufacturer. Do not touch the rotating parts while the machine is running. During use, dispersing the cutting tools and radial bearings may result in high temperatures. This instrument is only suitable for media that do not react with the energy generated during the processing and generate danger. At the same time, the processed media cannot react with energy generated by other means to generate danger, such as light. Do not use this instrument to handle flammable and explosive media. When using this instrument to handle pathogen media, the media must be placed in a closed container and operated in a fume hood. Due to normal wear and tear, rotating parts may fall into the processed media. Powdered items should not be placed near the instrument to prevent the airflow generated during high-speed rotation of the instrument from blowing away the items. After power is restored after a power outage, the instrument will automatically start. Therefore, please turn off the instrument after a power outage. Only by unplugging the power plug can the instrument power be completely disconnected. The power socket must be easy for the user to operate. Before installing accessories, the power must be disconnected. Only the accessories in the "Selected Accessories" list can ensure safe operation. Do not operate this instrument dry (without liquid medium). Without the cooling effect of the medium, the gasket and bearings may be damaged. The power supply voltage must be consistent with the rated voltage indicated on the instrument nameplate to protect the instrument and spare parts from compression and collision. Ensure that only professional maintenance personnel can open the instrument. The instrument can be used in conjunction with our recommended dispersing tool to perform high-speed homogenization and emulsification treatment on fluids and liquid media. Homogeneous dispersion treatment refers to the dispersion of solid, liquid, or gaseous substances into a continuous phase. Due to the high-speed operation of the rotor, the dispersed medium is automatically drawn into the dispersion head, and then these media are radially passed between the rotor and stator at a high speed. The shear and crushing forces generated by the enormous acceleration applied to the dispersed medium. In addition, the high-speed disturbance of the medium between the stator and rotor also promotes the dispersion effect. The dispersion effect largely depends on the shear gradient and the time of particles in the shear zone. The relative circumferential velocity between the rotor and stator is 6-20m/s. Usually, a few minutes of dispersion can achieve the desired particle size. Long term dispersion only significantly improves the particle size of the medium within the available particle size range. Prolonged dispersion can only raise the temperature of the medium. Shanghai Jingcan has been selling German IKA brand products for a long time, with sufficient stock and favorable prices. The quoted price includes tax and shipping. Among them, the best-selling products are the IKA magnetic stirrer and IKA centrifuge, which are deeply loved by university laboratory workers.

IKA small disperser T10Technical parameters: