When centrifuging hazardous substances or mixtures contaminated with toxic or pathogenic microorganisms, appropriate protective measures must be taken. In this case, a centrifugal container with special screw seals for hazardous substances must be used. For materials in risk categories 3 and 4, in addition to sealed centrifuge containers, biosafety systems must also be used (see the Laboratory Biosafety Manual published by the World Health Organization). This centrifuge does not have a biosafety system. When startingIKA G-L Small Micro CentrifugeBefore proceeding, please ensure that the rotor and the nuts securing the rotor are firmly fixed. Otherwise, it may cause damage to the equipment and accessories, and the rotor needs to withstand centrifugal force. Even minor scratches and cracks can cause serious internal material damage. If the rotor is damaged, do not use this device. If there is evidence of damage to the centrifuge chamber, do not operate the centrifuge, do not handle radioactive, flammable, or explosive substances, and do not handle substances that undergo chemical reactions and release large amounts of energy. If there is abnormal noise after the centrifuge is started, the rotor is not properly fixed. In this case, immediately stop the centrifuge. To ensure safe operation, plugs or other components that can be removed from the instrument (excluding optional accessories) must be reinstalled in place. This can prevent liquids, external objects, etc. from entering the instrument. Before centrifugation, the centrifuge tube should be visually inspected for any physical damage.

Continuing to use the damaged centrifuge tube may result in detachmentHeart mechanism and accessories are damaged. If you are dealing with corrosive chemicals, please protect the instrument from damage caused by these chemicals. This instrument is only suitable for media that do not react with the energy generated during the processing and generate danger. At the same time, the processed media cannot react with energy generated by other means, such as light, to generate danger. Use the rotor and rotor cover together, regularly check the rotor and rotor cover, do not operate the instrument without the rotor, the instrument must be monitored in real-time during operation, do not move or impact the instrument during operation, and the instrument feet must be clean and undamaged. Before operating the instrument, please read this instruction manual carefully and follow the safety operation regulations. Please place this instruction manual in a convenient location for users to consult, ensuring that only trained personnel can operate the instrument. Please comply with safety regulations, personal safety, and accident prevention regulations. Please operate the instrument under technically sound conditions.

According to the type of medium being processed, please wear appropriate protective equipment when operating the instrument, and be aware of the following possible dangers: liquid splashing, body, hair, and clothing being hooked. The power switch of IKA instruments must be able to be turned off at any time, directly, and safely. If the installation or placement location of the instrument cannot ensure that the switch can be turned off at any time, an emergency switch that is easy to operate must be installed in the work area. The instrument should be placed on a spacious, flat, stable, clean, non slip, dry, and fire-resistant table. Do not block the ventilation slots at the bottom and back of the instrument. Load the rotor symmetrically and ensure balance during centrifugation. Do not use the instrument in explosive environments; This instrument does not have explosion-proof function. When using substances that can form explosive mixtures, appropriate safety measures must be taken, such as working under a fume hood. To avoid personal injury and property damage, please follow the relevant safety and accident prevention measures when handling dangerous goods. This instrument must be operated on a flat surface and must not be moved during operation. Even during maintenance, only trained professionals can open the instrument. Before turning on the instrument, please unplug the power. After unplugging the power supply, some live parts inside the instrument may still be in a live state. Before cleaning, the instrument must be disconnected from the power supply. Only IKA approved cleaning solutions, including aqueous solutions containing surfactants and isopropanol, can be used to clean the instrument. When cleaning, please wear protective gloves, do not place electronic devices in cleaning agents, do not allow moisture to enter the instrument, and when using other cleaning agents not recommended by IKA, it is necessary to ensure that this cleaning method will not cause damage to the instrument to IKA company. When lifting the instrument, especially in case of instrument malfunction, please pay special attention to the possibility that the motor at the bottom of the instrument may be in a high temperature state. Only touch the edge of the instrument, and be careful of the sample inside the rotor. When lifting the instrument, the sample may flow out. IKA G-L is an ideal small-scale centrifuge for separating substances at medium speeds, especially suitable for the field of molecular biology. It can use standard 1.5/2.0 ml centrifuge tubes and PCR eight tube tubes. Equipped with button automatic lid opening function and safety protection function. Shanghai Jingcan has been selling German IKA brand products for a long time, with the main hot selling products being IKA magnetic stirrers, IKA dispersers, and so on.

IKA G-L Small Micro CentrifugeTechnical parameters: